FULL DESCRIPTION

The gate is designed without a ground track.

The tubular track is welded or bolted underneath the gate.

The gate runs on two hangers fixed to a concrete foundation on the stacking side.

Depending on the gate opening position, the hangers bear against either the top or bottom of the track (S version).

In the PAF version, the rollers remain in permanent contact with both the upper and lower parts of the track, minimising play.

PAF hangers are especially recommended for automated gates.

ADVANTAGES:

• No ground track required
• No concrete beam needed to secure or support the track
• Civil engineering work limited to the foundation block
• No risk of track wear or deformation
• No track deformation caused by vehicle traffic (e.g. lorries)
• No operating issues due to ground settlement or subsidence
• No obstruction of the track by dust, gravel, asphalt or debris
• No operating issues caused by frost or snow
• The gate can be installed on unstable ground (soil, grass, gravel, etc.)
• The ground does not need to be perfectly level