OPENTEC FW75

Set of black raw plastic end caps for pelmets (GH10430P). End caps can be painted on request in your choice of RAL colour.

Set of 4 black plastic pelmet brackets (GH10430P). Fastened to track 10400A if track is wall-mounted.

Clip-on raw aluminium pelmet. For track 10400A. Used for wall mounting - Height = 78.5 mm - Length = 6 m. Pelmets can be painted on request in your choice of RAL colour.

Clip-on raw aluminium pelmet. For track 10400A. Used for wall mounting - Height = 78.5 mm - Length = 3 m. Pelmets can be painted on request in your choice of RAL colour.

Galvanized U profile 30 x 30 mm - 2 m length.

• Galvanized U profile 30 x 30 mm - 3 m length

Galvanized U profile 30 x 30 mm - 4 m length.

Galvanized U profile 30 x 30 mm - 5 m length.

Perfil en U de acero galvanizado de 30 x 30 mm. Longitud = 6 m.

• Jointing bracket for U profile 30 x 30

Set of upper and lower pivots with integrated stop. Mounted on the first panel.

XA2 stainless steel plate, fastened on edge, with threaded M10 hole and XA2 stainless steel M10 hex nut. Length = 135 mm - width = 20 mm. For panels over 20 mm thick.

XA2 stainless steel angle bracket with stop. Enables panels to be correctly positioned in the closed position. Screwed on every two panels.

Drilling jig for 1510CXA2 hinges.

Screw-type male/female magnet kit Enables doors to be held in the open position. Thickness = 26 mm. Ø = 30 mm. RAL 7016.

Kit of upper and lower pivots for track 10400.

Clip-in kit for a panel weighing under 50 kg. Enables panels to be held in the closed position.

Clip-in kit for a panel weighing over 50 kg. Enables panels to be held in the closed position.