Clip-in kit for a panel weighing over 50 kg. Enables panels to be held in the closed position.
Clip-in kit for a panel weighing under 50 kg. Enables panels to be held in the closed position.
Kit of upper and lower pivots for track 10400.
Drilling jig for 1510CXA2 hinges.
XA2 stainless steel angle bracket with stop. Enables panels to be correctly positioned in the closed position. Screwed on every two panels.
XA2 stainless steel plate, fastened on edge, with threaded M10 hole and XA2 stainless steel M10 hex nut. Length = 135 mm - width = 20 mm. For panels over 20 mm thick.
Set of upper and lower pivots with integrated stop. Mounted on the first panel.
Galvanized U profile 30 x 30 mm - 2 m length.
Hanger with stainless steel reinforcement, equipped with 4 nylon-coated rollers mounted on ball bearings. Pin Ø = M10
Anodised aluminium drilled track, 51.5 x 47.5 mm cross-section. Length = 3 m.
SAF-BOIS Rebate:
SAF-BOIS Kit for 1 door up to 60 kg:
Set for 1 door weighing 21-60 kg fixing to the wall:
Screw-in plate, fixed on the edge for a front-mounted door. Length = 110 mm.
Kit for 2 opposing doors (50 Kg max each) and opening of 2 m. max including :
Kit for 1 single door (80 Kg max) and opening of 1.1 m. max including :
Damper closer system for gentle closing of doors (100 mm). Damper automatically follows door to its closed position. For doors between 61 and 81 Kg.
2 dampers recommended for doors 900 mm wide and over.
fr 
en 
de 
nl 
pl 
Nuestros distribuidores 
es