Interior door

MAGLASS – Straight sliding system for glass doors

MAGLASS – Straight sliding system for glass doors - Image 0 MAGLASS – Straight sliding system for glass doors - Image 1
MAGLASS – Straight sliding system for glass doors - Image 0 MAGLASS – Straight sliding system for glass doors - Image 1

Straight sliding system for 8, 10 or 12 mm glass doors.

  • Suitable for toughened safety glass, the clamp requires no drilling of the glass panel
  • Enhanced comfort thanks to the SAFSTOP system (hydraulic stop), which holds the door in either the open or closed position 
More details

The MAGLASS – Straight sliding system for glass doors range offers a wide variety of configurations, so you’re sure to find the one that suits your project

DISCOVER THE RANGE
Made in France since 1920
EPD
EN 1527
Garantie 25 ans
PDF
Commercial brochure All documents
Share this product sheet
Facebook Instagram X

Discover projects completed with

MAGLASS – Straight sliding system for glass doors

VIEW PROJECTS

FULL DESCRIPTION

Straight sliding system for 8, 10 or 12 mm glass doors.

  • Suitable for toughened safety glass, the clamp requires no drilling of the glass panel
  • Enhanced comfort thanks to the SAFSTOP system (hydraulic stop), which holds the door in either the open or closed position 
Selection PREMIUM

A product with flawless finishes for an exceptional result.

MANTION's advice :

Our hangers are fitted with a ball joint that improves system durability and compensates for imperfections in the installation surface. 

Technical datasheet

Product class Basic
System type Sliding door
Country of manufacture France
Guarantee 25 years - 100,000 cycles
Brand MANTION
Application Interior door
Door material Frameless glass
Fixing type Wall-mounted
Ceiling-mounted
Possible configuration 1 panel
2 opposing panels
Door weight From 10 to 80 kg
Catalogue Catalog 113
Catalog 613
Track material Aluminium

DISCOVER THE RANGE MAGLASS – Straight sliding system for glass doors

Select your Set (1 product)

Set for 8-10-12 mm door - Bay up to 0.96 m max

Set for 8-10-12 mm door - Bay up to 0.96 m max

Reference : GE7001

Ready-to-install set for a 8/10/12 mm door.

Select your Track (2 products)

Aluminium rail - 4 m

Aluminium rail - 4 m

Reference : 11145/400

Raw aluminium rail, section 32.1 x 26.4 mm, drilled every 0.44 m.

Length of 4 m.

Raw aluminium rail - 6 m

Raw aluminium rail - 6 m

Reference : 11145/600

Raw aluminium rail, section 32.1 x 26.4 mm, drilled every 0.44 m. Length of 6 m.

Select your Gear (5 products)

MAGLASS PINCE 80 Garniture

MAGLASS PINCE 80 Garniture

Reference : GE4201

Fitting for an 8/10/12 mm door.

Timing kit

Timing kit

Reference : GE5001

Fitting for 2 doors of 8/10/12 mm.

Timing kit

Timing kit

Reference : GE5002

Fitting for 2 doors of 8/10/12 mm.

Timing kit

Timing kit

Reference : GE5003

Fitting for 2 doors of 8/10/12 mm.

Timing kit

Timing kit

Reference : GE5004

Fitting for 2 doors of 8/10/12 mm.

Select your Angle plate (1 product)

Reinforced bracket support

Reinforced bracket support

Reference : 2529

Reinforced bracket support for wall mounting of the rail.

Select your End stop (1 product)

SAF clamp stop

SAF clamp stop

Reference : 11213

SAF clamp stop, adjustable stop block.

Associated rails: 11108, 13108, 11112 and 11312.

Select your Soft closer (1 product)

Door closer damper

Door closer damper

Reference : M66

Door closer damper system allowing the door to close.

Select your Lower guide (2 products)

Olive Basket Guide

Olive Basket Guide

Reference : 1102

Olive bottom guide on screw-on plate. For U 1109A for doors up to 150 KG maximum.

Stainless steel bottom guide

Stainless steel bottom guide

Reference : 1112/4

Guide at the bottom in brushed stainless steel.

Select your Sealing joint and brush (1 product)

Adhesive sealant - 3 m

Adhesive sealant - 3 m

Reference : 66JB/300

Translucent half-moon adhesive seal. Length: 3 m.

Select your Handle (2 products)

Polycarbonate recessed handle

Polycarbonate recessed handle

Reference : 102099

Round recessed handle in polycarbonate Ø 69.5 mm.
Set of 2 handles

Set of 2 handles

Reference : NEPTUNE-300

Set of 2 handles with brushed stainless steel finish fittings.

Height 300 mm.

Diameter: 20 mm.

Voulez-vous vraiment supprimer ce produit de votre panier?