SLIDING www.mantion.com www.mantion.com 36 37 Motorization Motorization for sliding shutters 25 - 80 mm Motorized single channel - 1 leaf wall and ceiling mounting 120 double channel - 2 telescopic leaves wall mounting 80x2 double channel - 3 telescopic leaves wall mounting 66x2 66 double channel - 4 telescopic leaves wall mounting 50x2 50x2 single channel - 2 symmetrical leaves wall and ceiling mounting 100 100 maximum leaf weight depending on configuration TRACK & PELMET - CEILING MOUNTING TRACK 11208P/600* Raw aluminium track, section 39 x 36 mm, drilled every 450 mm. Length = 6 m. PELMET & BRACKETS - single channel - 80 and 120 Kg 11261/...* Raw aluminium pelmet. Length = 2 / 3 and 6 m. 11294A Set of 5 anodised aluminium mounting brackets. For fixing the pelmet 11261. Supplied with A4 stainless steel fasteners. Fastened every 450 mm. *other lengths available on request TRACK & PELMETS - WALL MOUNTING TRACK 11208/...* Raw aluminium track, section 39 x 36 mm. Length = 2 / 3 and 6 m. PELMET & BRACKETS - 1 channel - 80 Kg 11293 Single adjustable fixing bracket in raw aluminium. Supplied with A2 stainless steel fasteners. Fastened every 660 mm at most. 11263L/...* Raw aluminium pelmet. Length = 2 / 3 and 6 m. 11266M Set of pelmet end caps 11263L, including: 2 raw aluminium end caps, 2 pelmet fastening clamps, 1 bracket for the end cap on the motor side, 8 A4 stainless steel fastening screws. PELMET & BRACKETS - double channel - 80 Kg & single channel - 120 Kg 11293D Double adjustable fixing bracket in anodised aluminium. Supplied with A2 stainless steel fasteners. Fastened every 660 mm at most (double channel - 80 Kg) Fastened every 450 mm at most (single channel - 120 Kg) 11264L/...* Raw aluminium pelmet. Length = 2 / 3 and 6 m. 11267M Set of pelmet end caps 11264L, including: 2 raw aluminium end caps, 2 pelmet fastening clamps, 1 bracket for the end cap on the motor side, 8 A4 stainless steel fastening screws. ACCESSOIRES 11269 Set of 5 additional clamps in anodised aluminium for fixing the pelmet to the brackets. For use when the pelmet is longer than 3 m. (in addition to the two clamps already supplied in the end cap kit). MOTORIZATION ACCESSORIES 11286XA2-SYN Stopper with integrated return pulley. 10190 Offset return pulley. 11291 A2 stainless steel joining bracket. 10192 A2 stainless steel driving bracket. 10171 A2 stainless steel fixed point assembly. 10172/... Reinforced cog belt. Length = 2.5 / 5 / 7.5 / 10 / 15 / 25 and 50 m. K0001170 Spare battery pack (consumable item). 2-year warranty. C0012620 2.2 m cable harness extension for motor/battery. 2 extensions can be added to the standard kit for a total length of 6.6 m. C0004780 433.92 MHz wireless RF switch, white. ROLLERS - PLATES - STOPPER ROLLERS 11280LXA2 Roller mounted on ball bearings, A2 stainless steel M8 screw (93 mm). max. weight 80 kg/ panel. 11282LXA4 Roller mounted on ball bearings, A4 stainless steel M8 screw (93 mm). max. weight 120 kg/ panel. PLATES 0026XA2 A2 stainless steel plate to be screwed on edge. Leaf thickness: 25 mm min. For leaves up to 80 Kg. 0026XA4 A4 stainless steel plate to be screwed on edge. For leaves up to 120 Kg. STOPPER 11286XA2 Stopper with two anchoring points. Supplied with A2 stainless steel fasteners. SYCOMM MOTOR WITH BATTERY PACK - 230V POWER SUPPLY W0002530 Drive kit (230V power supply) with wireless control, includes: - 1 SYCOMM motor (onboard electronics) with position-holding brake* - 1 battery pack (in case of power outages) - 2-year warranty - 1 cable harness to connect the motor to the battery - 1 wireless remote control C0004770 W0002630 Ditto with SYCOMM motor without position-holding brake* W0002520 Drive kit (230V power supply) with wired control, includes: - 1 SYCOMM motor (onboard electronics) with position-holding brake* - 1 battery pack (in case of power outages) - 2-year warranty - 1 cable harness to connect the motor to the battery - 1 wired switch C0001050 W0002620 Ditto with SYCOMM motor without position-holding brake** W002530 W002630 W002520 W002620 C0001050 C0004770 PACK BATTERIE + + = = + * Sycomm with position-holding brake: shutter is held in position: Holding force ~30 kg ** Sycomm without position-holding brake: the system is reversible. Operation possible by applying a force < 5 kg SYCOMM MOTOR - 230V POWER SUPPLY W0002510 Drive kit (230V power supply) with wireless control, includes: - 1 SYCOMM motor (onboard electronics) with position-holding brake* - 1 wireless remote control C0004770 W0002610 Ditto with SYCOMM motor without position-holding brake** W0002500 Drive kit (230V power supply) with wired control, includes: - 1 SYCOMM motor (onboard electronics) with position-holding brake* - 1 wired switch C0001050 W0002600 Ditto with SYCOMM motor without position-holding brake** W002510 W002610 W002500 W002600 C0001050 C0004770 Motor SYCOMM Motor SYCOMM + = = + Configurator QUOTE ONLINE SYCOMM MOTOR BATTERY PACK Soft start and stop – Obstacle detection Complies with CE requirements as per: EN60335-1:2013; EN60335-2-103:2004+A11:2009; NFP26341 EN61000-6-1:2007; EN61000-6-2:2006; EN61000-6-3:2007; EN61000-6-4:2007; NF 26-341 Complies with the European Directives: 2006/95/EC; 2006/42/EC; 2004/108/EC; 1999/5/EC; 2002/95/EC Note: All the data in the tables are provided for guidance only and are subject to variation according to the particular conditions of use. They are therefore not binding upon Mantion. Drive system designed for domestic use and mounting under a pelmet. Supply voltage 110-230 V AC - 50/60 Hz Max. power 25W Dimensions (L x W x H) 150x50x73 mm Degree of protection IP55 Type of limit switch Dynamic (stops on obstacle detection) Motor technology Brushless Linear velocity ~ 60mm/s Operating temperature -20 à +60°C Radio frequency 433.92MHz Length of mains cable 3m Voltage 12V Capacity 3000mA Type Lithium iron phosphate - LifePO4 Components list: Possible configurations: *other lengths available on request
RkJQdWJsaXNoZXIy ODAxNzY=