6 GRADE 1 GRADE 2 GRADE 3 GRADE 4 GRADE 5 GRADE 6 5 000 cycles 10 000 cycles 25 000 cycles 50 000 cycles 75 000 cycles 100 000 cycles GRADE 1 GRADE 2 GRADE 3 Door from 0 to 50 Kg 50 N* 30 N* 10 N* Door from 51 to 100 Kg 80 N* 50 N* 20 N* Door from 101 to 200 Kg 90 N* 60 N* 30 N* Door over 201 Kg 5 %** 3 %** 2 %** DURABILITY [D] INITIAL FRICTION [F] MANTION certifies the performance of its fittings for sliding doors and gives you the guaranty of high quality products. The different MANTION products have been designed, produced and tested to be used together. In order to avoid any technical problem or early use of fittings, require MANTION products. This commitment applies to complete assemblies, an essential condition for compliance with the EN1527 standard: MANTION tracks, rollers, brackets,, stops and guides. The European standard NF EN 1527 AUGUST 2019 (extract from the standard): A guarantee of transparency on the actual performance of sliding door hardware. Simple and effective: by specifying product characteristics in accordance with this standard, you can avoid the pitfalls of misleading sales arguments, and avoid the risks of hard sliding, jamming or premature breakage. What does the extract from standard NF EN 1527 AOUT 2019 say about sliding door fittings? It defines the objective criteria for qualifying an inseparable set of sliding door fittings (tracks, supports, rollers, brackets,, stops and guides) Corrosion resistance (resistance to salt spray) Initial friction (initial max. force required to open and close the panels) Durability (number of cycles) Overload testing Durability of limit stoper systems Guiding resistance It determines the conditions in which the tests have to be made. This allows an easy and real comparison between different competing products: Door under 200 kg: Height: 2 m. & stroke: 0.80 m. ou Height: 2 m. & stroke: 2 m. Door over 200 kg: Height: 2 m. & stroke: 2 m. all our tests for doors weighing less than 120 kg were carried out on a portal frame: Height: 2 m. & stroke 0.80 m. This warranty applies within the limit of a number of cycles specific to each range and the conditions of installation and use available on : www.MANTION.com THE STANDARD * (10 N): 10 newton correspond to a force of approx. 982 g to start movement of panel ** Percentage of the mass Number of cycles MANTION is certified compliant with the requirements of the following standards in order to provide you with the best possible service, both in terms of its products and its organization. EN ISO 9001 : 2015 EN ISO 14001 : 2015 ISO 9001 ISO 14001 To help you in your choice, MANTION has created an exclusive label, with a grade rating system, so you can see at a glance the quality of our products. Measured outside the range of action of door-closing dampers and active stops FRICTION 1 2 3 DURABILITY 1 2 3 4 5 6 EXCLUSIVITY MANTION
RkJQdWJsaXNoZXIy ODAxNzY=