59 CATALOG 214 | www.mantion.com H P1 P2 P2 H P1 serie 600 130 kg SERIE 600 CENTERFOLD SYSTEM | Screwing & welding type VERTICAL SECTIONS Track H P1 3530 108 13 5040 140 20 6255 176 25 8570 224 37 Track P2 3530 5 5040 10 6255 10 8570 15 Track H P1 3530 41 10.5±8 5040 57 24.5±11.5 6255 69 34.5±15.5 Track P2 3530 5 5040 10 6255 10 Wall fixing Top fixing PANEL WIDTH: A = distance between the middle of the thickness of the halfpanel and the axis of the hinge articulation point PANEL WIDTH: Opening on the right and on the left: Width of 1 panel = Width of 1/2 panel = half of 1 panel - dimension of A Opening on one side only: Width of 1 panel = Width of 1/2 panel = half of 1 panel - dimension of A width of the opening + 2 xA number of standard panels + 1 Once the panels have been assembled with hinges and folded parallel one to another, mark a central line on the top and bottom edges. The rollers, (and if required the guides), must be fixed on these lines and in the middle of the panel thickness. A = = 2 x width of the opening + 2 x A 2 x number of standard panels + 1
RkJQdWJsaXNoZXIy ODAxNzY=