4 UALITY - THE STANDARD grade 1 grade 2 grade 3 grade 4 grade 5 24 h* 48 h* 96 h* 240 h* 480 h* *Numbers of hours of resistance to salt spray (Standard EN1670) grade 1 grade 2 grade 3 grade 4 grade 5 grade 6 5 000 c* 10 000 c* 25 000 c* 50 000 c* 75 000 c* 100 000 c* *Number of cycles grade 1 grade 2 grade 3 Door of 50 Kg 50 N* 30 N* 10 N* Door from 51 to 100 Kg 80 N* 50 N* 20 N* Door from 101 to 330 Kg 90 N* 60 N* 30 N* Door over 330 Kg 5 %** 3 %** 2 %** * (10 N): 10 newton correspond to a force of approx. 982 g to start movement of panel **: Percentage of the mass DURABILITY [D] INITIAL FRICTION [F] CORROSION RESISTANCE [C] Mantion certifies* the performance of its fittings for sliding doors and gives you the guaranty of high quality products. The different Mantion products have been designed, produced and tested to be used together. In order to avoid any technical problem or early use of fittings, require MANTION products. ** This guaranty of durability applies to complete sets of Mantion products: tracks, rollers, brackets, stops and guides which are used and installed according to Mantion instructions (capacity and number of cycles) A safety insurance regarding the performance of fittings for sliding doors: Simple and efficient: By requiring the characteristics of a product according to the European standard, you will avoid inconvenience such as bad sliding, blocking or early wearing. What does the extract from the European standard NF EN 1527 indicate? It defines objective quality criteria for a complete set of fittings for sliding doors (tracks, brackets, rollers, stops and guides): - Corrosion resistance (resistance to salt spray) - Initial friction (initial max. force required to open and close the panels) - Durability (number of cycles) It determines the conditions in which the tests have to be made. This allows an easy and real comparison between different competing products: - Door under 200 kg: Height: 2 m. & stroke: 0.80 m. ou Height: 2 m. & stroke: 2 m.* - Door over 200 kg: Height: 2 m. & stroke: 2 m. * all our tests for doors weighing less than 120 kg were carried out on a portal frame: Height: 2 m. & stroke 0.80 m. It indicates the performance of fittings according to the tests results: corrosion fri cti on durability D 6 C F 2 3 100 000 cycles ** This guarantee applies within the limit of a number of cycles specific to each range and the conditions of installation and use available on: WWW.MANTION.COM ** ApaveCertification – 6Rue du Général AudranCS60123-92412Courbevoie-RCS Nanterre500229 398–SIRET:500 22939800028–APE : 7120B Apave Certificationestunemarque déposée–ApaveCertification is a registeredtrademark AC-IMP-110-06 Page 1/1 Seules les certifications suivies du signe * sont couvertes par l'accréditation N°4-0552 portée et liste des sites disponible sur www.cofrac.fr CERTIFICAT N° 224800/r1 Apave Certification certifie que le système de management mis en place par: Apave Certification certifies that the management system implemented by: MANTION SAS Sur le site suivant : On the following location: 7 rue Gay Lussac 25000 BESANCON, France Pour les activités suivantes : For the following activities: Conception, fabrication et distribution de ferrures pour portes coulissantes et systèmes de manutentions aériennes Concept, production and sales of armatures for sliding doors and air transportation systems. A été évalué conforme aux exigences requises par: Has been assessed to meet the requirements of: ISO 9001 : 2015 * ISO 14001 : 2015 * Ce certificat est valable à compter du: This certificate is valid from: 27/08/2024 Jusqu’au: Until: 26/08/2027 Directeur d’Apave Certification Director of Apave Certification Patrice LABROUSSE Date de certification initiale / Initial certification date: xx/xx/xxxx Date d’expiration antérieure / Previous expiry date: xx/xx/xxxx Date d’audit de renouvellement/Renewal audit date: xx/xx/xxxx Date de décision / Decision date: xx/xx/xxxx
RkJQdWJsaXNoZXIy ODAxNzY=