30 CAPACITY/DOOR 200 KG TRACK ALUMINIUM MOVEMENT STRAIGHT Straight sliding system for heavy doors MANTION® See details of the standard EN 1527 p.4 corrosion fri cti on durability D 6 C F 2 3 100 000 cycles 150 1550 Min 150 Conditions for 2 softclosers M70S 150 150 1000 Min Conditions for 1 softcloser M70S TOP MOUNTING ACCESSORIES 13410/600 Raw aluminium track, 66.5 x 47.5 mm cross-section. L = 6 m. Reinforced track: 2.4 kg per m. 13240 Roller with stainless steel framing and nylon wheels mounted on ball bearing. Black cataphoresis finish. 13044 Mounting plate to be screwed to the edge of the door. For wood and metal frames: minimum door/rail gap 30 mm. Black cataphoresis finish. 13040 Flush-mounted plate in untreated aluminium for 28FC profile. For wooden doors: minimum track/door reveal 7 mm. 28FC-29 Raw aluminium profile, section 34 x 30 mm for fixing the flush-mounted plate 13040. Length = 29 cm. 28FC-600 Ditto. Length = 600 cm. 29FC Set of 2 black plastic end caps for profile 28FC. 11242 End Stopper to hold the panel. Black cataphoresis finish. SOFT-CLOSER Item no. Description M70S Damper closer system with soft/opening and closing with over 100 mm soft closing travel distance. For doors weighing 120 to 200 Kg. For soft closing in opening and closing, minimum width of 1550 mm is needed. Accompanied with one roller. BOTTOM GUIDING ACCESSORIES 1109A/600 Aluminium U profile 25 x 18 mm. Length = 6 m. 1102XA2 Plate in stainless steelwith an olive guide, screwing type. For U-Profile 1109A. For doors up to 150 Kg. 1110/600 Galvanized steel U profile 30 x 30 mm. Length = 6 m. 1110GDL Nylon guide, screwing type - 100 x 25 x 25 mm. For U-Profile 1110. 1081 Plate with an olive guide, screwing type. For U-Profile 1110. Soft-closer M70S Innovation MANTION 13410/600 1110GDL 1081 1109 1110 28FC 13040 13240 11242 13044 + 29FC FOR THE BEST OPERATING RESULTS INSTALL 2 SOFT-CLOSERS One for the closing... and one for the opening!
RkJQdWJsaXNoZXIy ODAxNzY=