Systems for Gates Cantilever | Bottom Sliding | Swinging 411A Copyright ® MANTION
2 HERCULE® MANTION designs and manufactures sliding systems since 1920 Mantion s’agrandit 3 000 m2 Création de la gamme Hercule M. Verheyde et M. Raymond Mantion 1920 1955 1981 2003 1961 1992 2004 1930 1964 1965 1993 2005 1935 1966 2000 2008 1949 1975 2001 2012 Création de la société par M. Alexandre Mantion Rue Jeanneney à Besançon M. Raymond Mantion reprend la société Premier tarif de montures à galets Premier dépôt de brevet M. Verheyde devient président et actionnaire majoritaire Les deux premiers clients export : les sociétés Heinr. Betz Söhne en Allemagne et Redson aux Pays Bas M. Denis Schnœbelen est nommé président Mantion acquiert la société Bourquin Décolletage à Ornans Prise de participation majoritaire dans la société Valcomp en Pologne à Varsovie Ouverture à Varsovie de la société Mantion Handling System Reprise de la société Wimove à Genlis, spécialisée dans la motorisation pour le bâtiment Nouvelle ligne de tôlerie et création de la société Formatol Mantion reprend la société allemande B&K, et s’implante à Heiligenhaus sur 3 000m2 (elle devient Mantion Baubeschläge Gmbh à partir de 2002) M. Jean-Pierre Essert est nommé président de Mantion SA M. Raymond Mantion conçoit la gamme Tubel Création de la gamme Sportub Mantion s’implante en périphérie de Besançon (900m2) La société devient la Sarl Raymond Mantion et fils Restructuration de l’usine de Besançon Mantion est spécialisée en ferronnerie d’art Authorised by SGS ICS 29, avenue Aristide Briand 94111 Arcueil Cedex France t +33 (0)1 41 24 87 75 f +33 (0)1 73 01 71 29 www.sgs.com Page 1 of 1 This document is issued by the Company subject to its General Conditions of Certification Services accessible at http://www.sgs.com/en/Terms-and-Conditions. Attention is drawn to the limitations of liability, indemnification and jurisdictional issues established therein. The authenticity of this document may be verified at http://www.sgs.com/clients/certified_clients.htm. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Certificate FR15/81841903 The management system of MANTION SAS 7 rue Gay Lussac 25000 Besançon France has been assessed and certified as meeting the requirements of ISO 9001 : 2015 For the following activities Concept, production and sales of armatures for sliding doors and air transportation systems. This certificate is valid from 1 September 2021 until 26 August 2024 and remains valid subject to satisfactory surveillance audits. Issue 3. Authorised by SGS ICS 29, avenue Aristide Briand 94111 Arcueil Cedex France t +33 (0)1 41 24 87 75 f +33 (0)1 73 01 71 29 www.sgs.com Page 1 of 1 This document is issued by the Company subject to its General Conditions of Certification Services accessible at http://www.sgs.com/en/Terms-and-Conditions. Attention is drawn to the limitations of liability, indemnification and jurisdictional issues established therein. The authenticity of this document may be verified at http://www.sgs.com/clients/certified_clients.htm. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Certificate FR15/81841904 The management system of MANTION SAS 7 rue Gay Lussac 25000 Besançon, L'Aumône France has been assessed and certified as meeting the requirements of ISO 14001 : 2015 For the following activities Concept, production and sales of armatures for sliding doors and air transportation systems. This certificate is valid from 1 September 2021 until 26/08/2024 and remains valid subject to satisfactory surveillance audits. Issue 3 MANTION HAS AN INTERNATIONAL REPUTATION BASED ON: Innovation and a permanent adaptation of its range of products to its customers’ needs. A quality product, which meets the requirements of the strictest standards. THE MANTION KNOW-HOW MEANS BEFORE ALL: Its team: people with experience and great skills who do their best to keep bringing you the best service. Its permanent investment policy combined to the newest technologies. WITH MANTION, YOU BENEFIT FROM A TOP QUALITY SERVICE: Salesmen who listen to your needs and advise you. A strong technical support: an engineering department and technical advisers at your disposal. The study and the development of special products upon request. Very short delivery time. Very high quality products. MANTION, IT IS ALSO A COMPLETE RANGE OF: Fittings for sliding and folding doors. Fittings for sectional and lateral displacement doors. Fittings for glass doors. Fittings in stainless steel quality A2 and A4. Since MANTION has always cared about bringing you the best services within its organization and quality for its products, it is now up to standard: EN ISO 9001:2015 EN ISO 14001:2015 To reinforce its ECO-friendly policy, MANTION has a collective Environmental Product Declaration (EPD). The EPD is a major multi-criteria tool that helps professionals in their choices to make a building more sustainable, with limited impact on the environment while creating a healthy environment for future users.
3 QUALITY TRACKS MANTION manufactures its tracks at its factory in Besançon according to its own production process. This ensures a long durability and an optimal reliability of its hardware products. DESIGNER AND MANUFACTURER OF SLIDING SYSTEMS SINCE 1920 MOVING FURTHER TOGETHER
4 HERCULE® GATES MOUNTED ON PIVOTS CANTILEVER GATES BOTTOM SLIDING GATES
5 CANTILEVER GATES 6 Cantilever gates on aluminium track 7 Steel cantilever gates, proposed structures 8 Tracks and wheels for steel cantilever gates 14 Gear for steel cantilever gates 16 BOTTOM SLIDING GATES 17 Cast iron wheels 17 Tracks and steel wheels 18 Kits for bottom sliding gates 20 Stainless steel range, tracks and wheels 21 Locks, handles and stoppers 22 Guides, square steel pillars covers and stoppers 23 GATES MOUNTED ON PIVOTS 24 Gates mounted on pivots and hinges 24 Pivots with ball bearing 26 Accessories 27 Invisible door closer 28 THE MANTION RANGES 30 SUMMARY Disclaimer: Images of products showcased in the catalogues are for representation purpose. The design and specifications are subject to change without any disturbance to the final application. The company reserves full right to discontinue the sales of the products or solutions mentioned in the catalogue and the company is not responsible for any damage or liability occurring owing to this.
HERCULE® CANTILEVER GATES DIMENSIONS OF THE CONCRETE BLOCK: SAVE TIME !!! SIZE YOUR GATE TO SUITE YOUR SETUP WITH OUR SLIDESOFT® CALCULATION SOFTWARE ON: www.mantion.com technical video 6 B C L C P DESCRIPTION: There is no track on the ground. The tubular track is either welded or screwed to the gate. The gate slides on two carriages, which are fixed on a concrete block located on the push back side. According to the opening position of the gate, the carriages are in contact with either the upper or the lower part of the track to ensure a perfect balance. The wheels are in constant contact with the top and the bottom of the track limiting the clearance to a minimum (PAF series). PAF series carriages are strongly recommanded for motorized gates. AVANTAGES: • No track on the ground. • No concrete tie-beam is required to install or support the track. • The only construction work consists in the concrete block. • No risk of wear or deformation of the track due to the passage of lorries. • No risk of ground deformation due to the weather changes. • No obstruction of the track trough dust, gravel, stone chips ... • The gate can be installed on a non-stabilized ground (grass, gravel, mould...). • The ground need not be perfectly horizontal (in the opening). Length = shaft center distance B + 1 m (50 cm on each side) Width = 50 cm Depth = 80 cm
SINGLE CARRIAGE FOR ALUMINIUM TRACKS 9952N Carriage with polyamide wheels mounted on high- precision ball bearings. For track: 10500PAF. 9962N Carriage with polyamide wheels mounted on high- precision ball bearings. For track: 10600PAF. DOUBLE CARRIAGES FOR ALUMINIUM TRACKS 9958N Carriage with polyamide wheels mounted on high- precision ball bearings. For track: 10500PAF. 9968N Carriage with polyamide wheels mounted on high- precision ball bearings. For track: 10600PAF. CANTILEVER GATES ON ALUMINIUM TRACK 9958N/9968N 9952N/9962N E E A B C D Ø16 ALUMINIUM TRACKS Item Nr. Material Length Weight L H O 10500PAF6 Aluminium 6 m 29 Kg 65 150 17 10600PAF6 Aluminium 6 m 39 Kg 80 200 21 10600PAF9 Aluminium 9 m 58 Kg H L Ø14,5 mm HOLES POSITION FOR ITEMS 1050 GA AND 1060 GA Item Nr. L H Ø 10500PAF 33 17 60 10600PAF 40 20 74 10510PAF 10610PAF 1050GA 1060GA L H Ø ACCESSORIES FOR ALUMINIUM TRACKS 10510PAF Aluminium ornemental cap for track 10500PAF Screwing type. 10610PAF Aluminium ornemental cap for track 10600PAF Screwing type. 1050GA End wheel for track 10500PAF composed of 1 shaft, 2 spacers, 2 circlips and 1 steel wheel. 1060GA End wheel for track 10600PAF composed of 1 shaft, 2 spacers, 2 circlips and 1 steel wheel. 1060E Bottom end guide for track 9060 and 10500PAF. 1070E Bottom end guide for track 9070 and 10600PAF. DIMENSIONAL CHARASTERISTICS SINGLE CARRIAGES FOR ALUMINIUM TRACKS Item Nr. L H l R A B C 9952N 120 120 125 74 125 50 89 9962N 145 140 150 81 150 60 110 DOUBLE CARRIAGES FOR ALUMINIUM TRACKS Item Nr. L H l R A B C D 9958N 300 140 150 83 150 150 110 60 9968N 325 145 150 83 150 150 110 60 7 CARRIAGE SELECTION BASED ON THE TOTAL GATE WEIGHT AND THE OPENING WIDTH Total weight of the gate Opening width L 3 m 3,50 m 4 m 4,50 m 5 m 5,50 m 6 m 80 kg 9952N 9952N 9952N 9962N 9962N 130 kg 9962N 9962N 9962N 9962N 9962N 9968N 9968N 160 kg 9958N 9958N 9958N 9958N 9968N 9968N 9968N 250 kg 9968N 9968N 9968N 9968N 9968N 9968N 9968N POSITIONS OF THE CARRIAGES Item Nr. Opening width Dimension C Item Nr. Opening width Dimension C 9952N 4 m 0,190 m 9958N 4,5 m 0,280 m 9962N 5 m 0,205 m 9968N 6 m 0,295 m 1060E/1070E
HERCULE® 8 PROPOSED STRUCTURES FOR GATES FROM 3 TO 5.50 M OPENING WIDTH T2 T3 T5 T4 T2 T1 L C B C H HT LT Ouverture L Hauteur/ sol HT Hauteur H Long Totale LT entre axe B Cote C Ref monture Poids pour LT sans rail Poutre basse Rep T1 Cadre vertical Rep T2 Poutre haute Rep T3 Barreaux Rep T5 Qté Renfort interm. Rep T4 Qté Poids dans LT avec rail 3 1,00 0,9 4.37 0.9 240 9952PAF 90 60x60x3 60x60x3 60x60x3 20x20x2 33 x x 116 1,10 1 4.37 0.9 240 9952PAF 95 60x60x3 60x60x3 60x60x3 20x20x2 33 x x 121 1,20 1,1 4.37 0.9 240 9952PAF 99 60x60x3 60x60x3 60x60x3 20x20x2 33 x x 125 1,30 1,2 4.37 0.9 240 9952PAF 104 60x60x3 60x60x3 60x60x3 20x20x2 33 x x 130 1,40 1,3 4.37 0.9 240 9952PAF 109 60x60x3 60x60x3 60x60x3 20x20x2 33 x x 135 1,50 1,4 4.37 0.9 240 9952PAF 113 60x60x3 60x60x3 60x60x3 20x20x2 33 x x 139 3,5 1,00 0,9 5.02 1.05 240 9952PAF 103 60x60x3 60x60x3 60x60x3 20x20x2 38 x x 133 1,10 1 5.02 1.05 240 9952PAF 108 60x60x3 60x60x3 60x60x3 20x20x2 38 x x 138 1,20 1,1 5.02 1.05 240 9952PAF 113 60x60x3 60x60x3 60x60x3 20x20x2 38 x x 143 1,30 1,2 5.02 1.05 240 9952PAF 119 60x60x3 60x60x3 60x60x3 20x20x2 38 x x 149 1,40 1,3 5.02 1.05 240 9952PAF 124 60x60x3 60x60x3 60x60x3 20x20x2 38 x x 154 1,50 1,4 5.04 1.07 240 9952PAF 129 60x60x3 60x60x3 60x60x3 20x20x2 38 x x 159 4 1,00 0,9 5.67 1.20 240 9952PAF 116 60x60x3 60x60x3 60x60x3 20x20x2 43 x x 150 1,10 1 5.67 1.20 240 9952PAF 122 60x60x3 60x60x3 60x60x3 20x20x2 43 x x 156 1,20 1,1 5.70 1.23 240 9952PAF 128 60x60x3 60x60x3 60x60x3 20x20x2 43 x x 162 1,30 1,2 5.78 1.31 240 9952PAF 134 60x60x3 60x60x3 60x60x3 20x20x2 44 x x 168 1,40 1,3 5.86 1.39 240 9952PAF 140 60x60x3 60x60x3 60x60x3 20x20x2 44 x x 175 1,50 1,4 5.95 1.48 240 9952PAF 146 60x60x3 60x60x3 60x60x3 20x20x2 45 x x 181 4,5 1,00 0,9 6.62 1.65 240 9952PAF 144 60x60x3 60x60x3 60x60x3 25x25x2 48 x x 183 1,00 0,9 6.47 1.35 310 9958PAF 144 60x60x3 60x60x3 60x60x3 25x25x2 48 x x 182 1,20 1,08 6.47 1.35 310 9958PAF 160 60x60x3 60x60x3 60x60x3 25x25x2 48 x x 199 1,40 1,28 6.47 1.35 310 9958PAF 172 60x60x3 60x60x3 60x60x3 25x25x2 48 x x 210 1,60 1,48 6.52 1.40 310 9958PAF 192 60x60x3 60x60x3 60x60x3 25x25x2 48 x x 226 5 1,00 0,88 7.16 1.54 310 9958PAF 189 80x80x3 80x80x3 80x80x3 25x25x2 51 40x40x2 4 227 1,20 1,08 7.40 1.78 310 9958PAF 209 80x80x3 80x80x3 80x80x3 25x25x2 54 40x40x2 4 249 1,40 1,28 7.67 2.05 310 9958PAF 229 80x80x3 80x80x3 80x80x3 25x25x2 55 40x40x2 4 271 1,40 1,24 7.02 1.50 260 9962PAF 205 80x80x3 80x80x3 80x80x3 25x25x2 50 40x40x2 4 271 1,60 1,48 7.02 2.35 260 9962PAF 231 80x80x3 80x80x3 80x80x3 25x25x2 50 40x40x2 4 291 1,80 1,64 7.02 1.50 260 9962PAF 247 80x80x3 80x80x3 80x80x3 25x25x2 50 40x40x2 4 307 2,00 1,84 7.06 1.55 260 9962PAF 271 80x80x3 80x80x3 80x80x3 25x25x2 50 40X40X2 4 331 5,5 1,20 1,04 7.67 1.65 260 9962PAF 207 80x80x3 80x80x3 80x80x3 25x25x2 55 40x40x2 4 273 1,40 1,24 7.67 1.65 260 9962PAF 229 80x80x3 80x80x3 80x80x3 25x25x2 55 40x40x2 4 295 1,60 1,44 7.67 1.65 260 9962PAF 250 80x80x3 80x80x3 80x80x3 25x25x2 55 40x40x2 4 316 1,80 1,64 7.73 1.71 260 9962PAF 269 80x80x3 80x80x3 80x80x3 25x25x2 55 40x40x2 4 334 2,00 1,84 7.96 1.94 260 9962PAF 294 80x80x3 80x80x3 80x80x3 25x25x2 56 40x40x2 4 362 STEEL CANTILEVER GATES "PAF series" see carriages dimensions on pages 14 and 15 Opening width L To al height Gate height H T tal length shaft center distance B C Part Nr. Carriag We ght without track L wer eam T1 Vertical frame T2 Higher beam T3 Bars T5 y Internal support T4 y Total Weight included track Recommendations are for information only for a frequency of 20 cycles per day with this dimensions B. For frequency over 20 cycles contact us.
9 STEEL CANTILEVER GATES "PAF series" H T2 T3 T4 T5 T2 T2 T1 L C B C H HT LT PROPOSED STRUCTURES FOR GATES FROM 6 TO 8.50 M OPENING WIDTH see carriages dimensions on pages 14 and 15 Opening width L Total height HT Gate height H Total length LT shaft center distance B C Part Nr. Carriage Weight without track Lower beam T1 Vertical frame T2 Renfort digital T2 Higher beam T3 Bar T5 Qty Internal support T4 Qty Total Weight included track 6 1,20 1,04 8.32 1.80 260 9962PAF 227 80x80x3 80x80x3 80x80x3 80x80x3 25x25x2 43 40x40x2 4 298 1,40 1,24 8.32 1.80 260 9962PAF 250 80x80x3 80x80x3 80x80x3 80x80x3 25x25x2 43 40x40x2 4 321 1,60 1,44 8.47 1.96 260 9962PAF 274 80x80x3 80x80x3 80x80x3 80x80x3 25x25x2 43 40x40x2 4 346 1,80 1,64 8.96 2.45 260 9962PAF 319 120x80x3 80x80x3 80x80x3 120x80x3 30x30x2 41 40x40x2 4 396 2,00 1,84 8.50 1.80 350 9968PAF 360 120x80x3 80x80x3 80x80x3 120x80x3 30x30x2 41 40x40x2 4 433 6,5 1,20 1,04 8.97 1.95 260 9962PAF 243 80x80x3 80x80x3 80x80x3 80x80x3 25x25x2 46 40x40x2 4 320 1,40 1,24 9.13 2.11 260 9962PAF 269 80x80x3 80x80x3 80x80x3 80x80x3 25x25x2 46 40x40x2 4 347 1,60 1,44 9.15 1.95 350 9968PAF 320 120x80x3 80x80x3 80x80x3 80x80x3 25x25x2 46 40x40x2 4 399 1,80 1,64 9.15 1.95 350 9968PAF 348 120x80x3 80x80x3 80x80x3 120x80x3 30x30x2 45 40x40x2 4 427 2,00 1,84 9.15 1.95 350 9968PAF 375 120x80x3 80x80x3 80x80x3 120x80x3 30x30x2 45 40x40x2 4 454 7 1,20 1,04 10.03 2.51 260 9962PAF 284 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 48 40x40x2 4 370 1,20 1,04 9.80 2.10 350 9968PAF 274 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 48 40x40x2 4 358 1,40 1,24 9.80 2.10 350 9968PAF 303 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 48 40x40x2 4 387 1,60 1,44 9.80 2.10 350 9968PAF 332 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 48 40x40x2 4 416 1,80 1,64 9.80 2.10 350 9968PAF 372 120x80x3 80x80x3 80x80x3 120x80x3 30x30x2 48 40x40x2 4 456 2,00 1,84 9.80 2.10 350 9968PAF 401 120x80x3 80x80x3 80x80x3 120x80x3 30x30x2 48 40x40x2 4 485 7,5 1,20 1,04 10.45 2.25 350 9968PAF 294 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 52 40x40x2 5 384 1,40 1,24 10.45 2.25 350 9968PAF 325 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 52 40x40x2 5 415 1,60 1,44 10.45 2.25 350 9968PAF 356 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 52 40x40x2 5 446 1,80 1,64 10.45 2.25 350 9968PAF 399 120x80x3 80x80x3 80x80x3 120x80x3 30x30x2 52 40x40x2 5 489 2,00 1,84 10.45 2.25 350 9968PAF 430 120x80x3 80x80x3 80x80x3 120x80x3 30x30x2 52 40x40x2 5 520 8 1,20 1,04 11.10 2.40 350 9968PAF 319 140x80x3 80x80x3 80x80x3 80x80x3 30x30x2 55 40x40x2 5 414 1,40 1,24 11.10 2.40 350 9968PAF 351 140x80x3 80x80x3 80x80x3 80x80x3 30x30x2 55 40x40x2 5 446 1,60 1,44 11.10 2.40 350 9968PAF 384 140x80x3 80x80x3 80x80x3 80x80x3 30x30x2 55 40x40x2 5 479 1,80 1,64 11.10 2.40 350 9968PAF 430 140x80x3 80x80x3 80x80x3 120x80x3 30x30x2 55 40x40x2 5 525 2,00 1,84 11.10 2.40 350 9968PAF 462 140x80x3 80x80x3 80x80x3 120x80x3 30x30x2 55 40x40x2 5 557 8,5 1,20 1,04 11.75 2.55 350 9968PAF 339 140x80x3 80x80x3 80x80x3 80x80x3 30x30x2 58 40x40x2 6 440 1,40 1,24 11.75 2.55 350 9968PAF 373 140x80x3 80x80x3 80x80x3 80x80x3 30x30x2 58 40x40x2 6 474 1,60 1,44 11.75 2.55 350 9968PAF 408 140x80x3 80x80x3 80x80x3 80x80x3 30x30x2 58 40x40x2 6 509 1,80 1,64 11.75 2.55 350 9968PAF 457 140x80x3 80x80x3 80x80x3 120x80x3 30x30x2 58 40x40x2 6 558 2,00 1,84 11.75 2.55 350 9968PAF 492 140x80x3 80x80x3 80x80x3 120x80x3 30x30x2 58 40x40x2 6 593 Recommendations are for information only for a frequency of 20 cycles per day with this dimensions B. For frequency over 20 cycles contact us.
HERCULE® SLIDSOFT® : ONLINE CONFIGURATOR ! www.mantion.com see carriages dimensions on pages 14 and 15 10 LT C C L B T2 T2 T2 T3 T4 T5 T1 H HT PROPOSED STRUCTURES FOR GATES FROM 9 TO 10.50 M OPENING WIDTH Recommendations are for information only for a frequency of 20 cycles per day with this dimensions B. For frequency over 20 cycles contact us. STEEL CANTILEVER GATES "PAF series" Opening width L Total height HT Gate height H Total length LT shaft center distance B C Part Nr. Carriage Weight without track Lower beam T1 Vertical frame T2 Diagonal support T2 Higher beam T3 Bars T5 Qty Internal support T4 Qty Total Weight included track 9 1,30 1,14 12.40 2.70 350 9968PAF 492 160x80x4 80x80x3 80x80x3 120x80x3 40x40x2 57 60x60x3 6 598 1,40 1,24 12.51 2.80 350 9968PAF 618 160x80x4 80x80x3 80x80x3 120x80x3 40x40x2 57 60x60x3 6 623 1,60 1,44 12.89 3.19 350 9968PAF 585 160x80x4 80x80x3 80x80x3 120x80x3 40x40x2 57 60x60x3 6 686 1,60 1,39 12.45 2.70 380 9978PAF 561 160x80x4 80x80x3 80x80x3 120x80x3 40x40x2 57 60x60x3 6 748 1,80 1,59 12.45 2.70 380 9978PAF 616 160x80x4 80x80x3 80x80x3 140x80x3 40x40x2 57 60x60x3 6 803 2,00 1,79 12.45 2.70 380 9978PAF 664 160x80x4 80x80x3 80x80x3 140x80x3 40x40x2 57 60x60x3 6 851 9,5 1,30 1,09 13.10 2.85 380 9978PAF 524 160x80x4 80x80x3 80x80x3 140x80x3 40x40x2 60 60x60x3 7 721 1,40 1,19 13.10 2.85 380 9978PAF 550 160x80x4 80x80x3 80x80x3 140x80x3 40x40x2 60 60x60x3 7 747 1,60 1,39 13.10 2.85 380 9978PAF 602 160x80x4 80x80x3 80x80x3 140x80x3 40x40x2 60 60x60x3 7 799 1,80 1,59 13.10 2.85 380 9978PAF 664 180x80x4 80x80x3 80x80x3 140x80x3 40x40x2 60 60x60x3 7 861 2,00 1,79 13.10 2.85 380 9978PAF 766 180x80x4 80x80x3 80x80x3 160x80x4 40x40x2 60 60x60x3 7 963 10 1,40 1,19 13.75 3 380 9978PAF 654 180x80x4 80x80x3 80x80x3 160x80x4 40x40x2 62 80x80x3 7 860 1,50 1,29 13.75 3 380 9978PAF 682 180x80x4 80x80x3 80x80x3 160x80x4 40x40x2 62 80x80x3 7 888 1,60 1,39 13.75 3 380 9978PAF 711 180x80x4 80x80x3 80x80x3 160x80x4 40x40x2 62 80x80x3 7 917 1,80 1,59 13.75 3 380 9978PAF 778 180x80x4 80x80x3 80x80x3 160x80x4 40x40x2 62 80x80x3 7 984 2,00 1,79 13.75 3 380 9978PAF 835 180x80x4 80x80x3 80x80x3 180x80x4 40x40x2 62 80x80x3 7 1041 10,5 1,4 1,19 14.40 3.15 380 9978PAF 683 180x80x4 80x80x3 80x80x3 160x80x4 40x40x2 66 80x80x3 7 899 1,5 1,29 14.40 3.15 380 9978PAF 713 180x80x4 80x80x3 80x80x3 160x80x4 40x40x2 66 80x80x3 7 929 1,6 1,39 14.40 3.15 380 9978PAF 742 180x80x4 80x80x3 80x80x3 160x80x4 40x40x2 66 80x80x3 7 958 1,8 1,59 14.40 3.15 380 9978PAF 813 180x80x4 80x80x3 80x80x3 180x80x4 40x40x2 66 80x80x3 7 1029 2 1,79 14.58 3.33 380 9978PAF 871 180x80x4 80x80x3 80x80x3 180x80x4 40x40x2 66 80x80x3 7 1090
STEEL CANTILEVER GATES "S series" see carriages dimensions on pages 14 and 15 11 PROPOSED STRUCTURES FOR GATES FROM 3 TO 5.50 M OPENING WIDTH T2 T3 T5 T4 T2 T1 L C B C H HT LT Opening width L Total height HT Gate height H Total length LT shaft center distance B C Part Nr. Carriage Weight without track Lower beam T1 Vertical frame T2 Higher beam T3 Bars T5 Qty Internal support T4 Qty Total Weight included track 3 1,00 0,9 4.46 0.9 280 9952S 77 60x60x3 60x60x3 60x60x3 20x20x2 33 x x 103 1,10 1 4.46 0.9 280 9952S 81 60x60x3 60x60x3 60x60x3 20x20x2 33 x x 107 1,20 1,1 4.46 0.9 280 9952S 86 60x60x3 60x60x3 60x60x3 20x20x2 33 x x 112 1,30 1,2 4.46 0.9 280 9952S 91 60x60x3 60x60x3 60x60x3 20x20x2 33 x x 117 1,40 1,3 4.46 0.9 280 9952S 95 60x60x3 60x60x3 60x60x3 20x20x2 33 x x 121 1,50 1,4 4.46 0.9 280 9952S 100 60x60x3 60x60x3 60x60x3 20x20x2 33 x x 126 3,5 1,00 0,9 5.11 1.05 280 9952S 88 60x60x3 60x60x3 60x60x3 20x20x2 38 x x 118 1,10 1 5.11 1.05 280 9952S 93 60x60x3 60x60x3 60x60x3 20x20x2 38 x x 123 1,20 1,1 5.11 1.05 280 9952S 98 60x60x3 60x60x3 60x60x3 20x20x2 38 x x 128 1,30 1,2 5.11 1.05 280 9952S 103 60x60x3 60x60x3 60x60x3 20x20x2 38 x x 133 1,40 1,3 5.11 1.05 280 9952S 109 60x60x3 60x60x3 60x60x3 20x20x2 38 x x 139 1,50 1,4 5.11 1.05 280 9952S 114 60x60x3 60x60x3 60x60x3 20x20x2 38 x x 144 4 1,00 0,9 5.76 1.20 280 9952S 99 60x60x3 60x60x3 60x60x3 20x20x2 43 x x 133 1,10 1 5.76 1.20 280 9952S 104 60x60x3 60x60x3 60x60x3 20x20x2 43 x x 138 1,20 1,1 5.76 1.20 280 9952S 110 60x60x3 60x60x3 60x60x3 20x20x2 43 x x 144 1,30 1,2 5.76 1.20 280 9952S 116 60x60x3 60x60x3 60x60x3 20x20x2 43 x x 150 1,40 1,3 5.79 1.23 280 9952S 122 60x60x3 60x60x3 60x60x3 20x20x2 43 x x 156 1,50 1,4 5.87 1.31 280 9952S 127 60x60x3 60x60x3 60x60x3 20x20x2 44 x x 162 4,5 1,00 0,9 6.48 1.42 280 9952S 122 60x60x3 60x60x3 60x60x3 25x25x2 47 x x 160 1,20 1,1 6.73 1.67 280 9952S 137 60x60x3 60x60x3 60x60x3 25x25x2 49 x x 177 1,20 1,06 6.47 1.35 310 9958S 141 60x60x3 60x60x3 60x60x3 25x25x2 49 x x 179 1,40 1,29 7.02 1.96 280 9952S 156 60x60x3 60x60x3 60x60x3 25x25x2 49 x x 198 1,40 1,26 6.47 1.35 310 9958S 150 60x60x3 60x60x3 60x60x3 25x25x2 47 x x 188 1,60 1,46 6.47 1.35 310 9958S 166 60x60x3 60x60x3 60x60x3 25x25x2 47 x x 204 5 1,00 0,86 7.12 1.50 310 9958S 162 80x80x3 80x80x3 80x80x3 25x25x2 50 40x40x2 4 204 1,20 1,06 7.12 1.50 310 9958S 181 80x80x3 80x80x3 80x80x3 25x25x2 50 40x40x2 4 223 1,40 1,26 7.12 1.50 310 9958S 201 80x80x3 80x80x3 80x80x3 25x25x2 50 40x40x2 4 243 1,60 1,46 7.12 1.50 310 9958S 221 80x80x3 80x80x3 80x80x3 25x25x2 50 40x40x2 4 263 1,80 1,66 7.12 1.50 310 9958S 237 80x80x3 80x80x3 80x80x3 25x25x2 50 40x40x2 4 279 2,00 1,86 7.12 1.50 310 9958S 260 80x80x3 80x80x3 80x80x3 25x25x2 50 40X40X2 4 302 5,5 1,00 0.86 7.77 1.65 310 9958S 177 80x80x3 80x80x3 80x80x3 25x25x2 55 40x40x2 4 222 1,20 1,06 7.77 1.65 310 9958S 198 80x80x3 80x80x3 80x80x3 25x25x2 55 40x40x2 4 243 1,40 1,26 7.77 1.65 310 9958S 219 80x80x3 80x80x3 80x80x3 25x25x2 55 40x40x2 4 264 1,60 1,46 7.77 1.65 310 9958S 240 80x80x3 80x80x3 80x80x3 25x25x2 55 40x40x2 4 285 1,80 1,66 7.77 1.65 310 9958S 258 80x80x3 80x80x3 80x80x3 25x25x2 55 40x40x2 4 303 2,00 1,86 7.92 1.80 310 9958S 282 80x80x3 80x80x3 80x80x3 25x25x2 55 40x40x2 4 329 Recommendations are for information only for a frequency of 20 cycles per day with this dimensions B. For frequency over 20 cycles contact us.
HERCULE® see carriages dimensions on pages 14 and 15 STEEL CANTILEVER GATES "S series" 12 PROPOSED STRUCTURES FOR GATES FROM 6 TO 8.50 M OPENING WIDTH H LT T2 T3 T4 T5 T2 T2 T1 L C B C H HT Opening width L Total height HT Gate height H Total length LT center distance of shaft B C Part Nr. Carriage Weight without track Lower beam T1 Vertical frame T2 Renfort digital T2 Higher beam T3 Bar T5 Qty Internal support T4 Qty Total Weight included track 6 1,20 1,06 8.42 1.80 310 9958S 215 80x80x3 80x80x3 80x80x3 80x80x3 25x25x2 43 40x40x2 4 265 1,40 1,26 8.42 1.80 310 9958S 238 80x80x3 80x80x3 80x80x3 80x80x3 25x25x2 43 40x40x2 4 288 1,60 1,46 8.42 1.80 310 9958S 262 80x80x3 80x80x3 80x80x3 80x80x3 25x25x2 43 40x40x2 4 312 1,80 1,66 8.86 2.24 310 9958S 305 120x80x3 80x80x3 80x80x3 120x80x3 30x30x2 41 40x40x2 4 358 1,80 1,65 8.55 1.80 380 9968S 340 120x80x3 80x80x3 80x80x3 120x80x3 30x30x2 41 40x40x2 4 390 6,5 1,20 1,06 9.07 1.95 310 9958S 231 80x80x3 80x80x3 80x80x3 80x80x3 25x25x2 46 40x40x2 4 285 1,40 1,26 9.07 1.95 310 9958S 256 80x80x3 80x80x3 80x80x3 80x80x3 25x25x2 46 40x40x2 4 310 1,60 1,46 9.58 2.47 310 9958S 306 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 45 40x40x2 4 363 1,60 1,45 9.20 1.95 380 9968S 318 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 45 40x40x2 4 397 1,80 1,65 9.20 1.95 380 9968S 348 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 45 40x40x2 4 427 2,00 1,85 9.20 1.95 380 9968S 375 120x80x3 80x80x3 80x80x3 120x80x3 30x30x2 45 40x40x2 4 454 7 1,20 1,06 9.86 2.24 310 9958S 276 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 48 40x40x2 4 334 1,40 1,25 9.85 2.10 380 9968S 302 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 48 40x40x2 4 387 1,60 1,45 9.85 2.10 380 9968S 331 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 48 40x40x2 4 416 1,80 1,65 9.85 2.10 380 9968S 372 120x80x3 80x80x3 80x80x3 120x80x3 30x30x2 48 40x40x2 4 457 2,00 1,85 9.85 2.10 380 9968S 400 120x80x3 80x80x3 80x80x3 120x80x3 30x30x2 48 40x40x2 4 485 7,5 1,20 1,06 10.79 2.67 310 9958S 295 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 52 40x40x2 5 359 1,20 1,05 10.50 2.25 380 9968S 294 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 52 40x40x2 5 384 1,40 1,25 10.50 2.25 380 9968S 325 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 52 40x40x2 5 415 1,60 1,45 10.50 2.25 380 9968S 356 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 52 40x40x2 5 446 1,80 1,65 10.50 2.25 380 9968S 400 120x80x3 80x80x3 80x80x3 120x80x3 30x30x2 52 40x40x2 5 490 2,00 1,85 10.66 2.40 380 9968S 430 120x80x3 80x80x3 80x80x3 120x80x3 30x30x2 52 40x40x2 5 522 8 1,20 1,05 11.15 2.40 380 9968S 318 140x80x3 80x80x3 80x80x3 80x80x3 30x30x2 55 40x40x2 5 414 1,40 1,25 11.15 2.40 380 9968S 351 140x80x3 80x80x3 80x80x3 80x80x3 30x30x2 55 40x40x2 5 447 1,60 1,45 11.15 2.40 380 9968S 383 140x80x3 80x80x3 80x80x3 80x80x3 30x30x2 55 40x40x2 5 479 1,80 1,65 11.34 2.59 380 9968S 430 140x80x3 80x80x3 80x80x3 120x80x3 30x30x2 55 40x40x2 5 527 2,00 1,85 11.63 2.87 380 9968S 462 140x80x3 80x80x3 80x80x3 120x80x3 30x30x2 55 40x40x2 5 562 8,5 1,20 1,05 11.80 2.55 380 9968S 339 140x80x3 80x80x3 80x80x3 80x80x3 30x30x2 58 40x40x2 6 440 1,40 1,25 11.80 2.55 380 9968S 374 140x80x3 80x80x3 80x80x3 80x80x3 30x30x2 58 40x40x2 6 475 1,60 1,45 11.85 2.60 380 9968S 408 140x80x3 80x80x3 80x80x3 80x80x3 30x30x2 58 40x40x2 6 510 1,80 1,65 12.30 3.05 380 9968S 451 140x80x3 80x80x3 80x80x3 120x80x3 30x30x2 58 40x40x2 6 563 2,00 1,85 12.65 3.40 380 9968S 492 140x80x3 80x80x3 80x80x3 120x80x3 30x30x2 58 40x40x2 6 601 2,00 1,79 11.93 2.55 440 9978S 514 140x80x3 80x80x3 80x80x3 120x80x3 30x30x2 58 40x40x2 6 693 Recommendations are for information only for a frequency of 20 cycles per day with this dimensions B. For frequency over 20 cycles contact us.
SLIDSOFT® : ONLINE CONFIGURATOR ! www.mantion.com see carriages dimensions on pages 14 and 15 STEEL CANTILEVER GATES "S series" 13 PROPOSED STRUCTURES FOR GATES FROM 9 TO 10.50 M OPENING WIDTH LT C C L B T2 T2 T2 T3 T4 T5 T1 H HT Opening width L Total height HT Gate height H Total length LT center distance of shaft B C Part Nr. Carriage Weight Lower beam T1 Vertical frame T2 Diagonal support T2 Higher beam T3 Bars T5 Qty Internal support T4 Qty Total Weight included track 9 1,30 1,15 13,40 3,63 380 9968S 498 160x80x4 80x80x3 80x80x3 120x80x3 40x40x2 57 60x60x3 6 610 1,30 1,35 12,58 2,70 440 9978S 479 160x80x4 80x80x3 80x80x3 120x80x3 40x40x2 57 60x60x3 6 705 1,40 1,25 12,58 2,70 440 9978S 504 160x80x4 80x80x3 80x80x3 120x80x3 40x40x2 57 60x60x3 6 730 1,60 1,39 12,58 2,70 440 9978S 549 160x80x4 80x80x3 80x80x3 120x80x3 40x40x2 57 60x60x3 6 750 1,80 1,59 12,58 2,70 440 9978S 604 160x80x4 80x80x3 80x80x3 140x80x3 40x40x2 57 60x60x3 6 805 2,00 1,79 12,58 2,70 440 9978S 654 160x80x4 80x80x3 80x80x3 140x80x3 40x40x2 57 60x60x3 6 855 9,5 1,30 1,09 13,23 2,85 440 9978S 519 160x80x4 80x80x3 80x80x3 140x80x3 40x40x2 60 60x60x3 7 723 1,40 1,19 13,23 2,85 440 9978S 539 160x80x4 80x80x3 80x80x3 140x80x3 40x40x2 60 60x60x3 7 749 1,60 1,39 13,23 2,85 440 9978S 589 160x80x4 80x80x3 80x80x3 140x80x3 40x40x2 60 60x60x3 7 801 1,80 1,59 13,23 2,85 440 9978S 654 180x80x4 80x80x3 80x80x3 140x80x3 40x40x2 60 60x60x3 7 863 2,00 1,79 13,23 2,85 440 9978S 754 180x80x4 80x80x3 80x80x3 160x80x4 40x40x2 60 60x60x3 7 965 10 1,40 1,19 13,88 3,00 440 9978S 643 180x80x4 80x80x3 80x80x3 160x80x4 40x40x2 62 80x80x3 7 862 1,50 1,29 13,88 3,00 440 9978S 668 180x80x4 80x80x3 80x80x3 160x80x4 40x40x2 62 80x80x3 7 890 1,60 1,39 13,88 3,00 440 9978S 698 180x80x4 80x80x3 80x80x3 160x80x4 40x40x2 62 80x80x3 7 919 1,80 1,59 13,88 3,00 440 9978S 768 180x80x4 80x80x3 80x80x3 180x80x4 40x40x2 62 80x80x3 7 986 2,00 1,79 14,06 3,18 440 9978S 828 180x80x4 80x80x3 80x80x3 180x80x4 40x40x2 62 80x80x3 7 1046 10,5 1,40 1,19 14,53 3,15 440 9978S 668 180x80x4 80x80x3 80x80x3 160x80x4 40x40x2 66 80x80x3 7 901 1,50 1,29 14,53 3,15 440 9978S 698 180x80x4 80x80x3 80x80x3 160x80x4 40x40x2 66 80x80x3 7 931 1,60 1,39 14,53 3,15 440 9978S 728 180x80x4 80x80x3 80x80x3 160x80x4 40x40x2 66 80x80x3 7 960 1,80 1,59 14,53 3,25 440 9978S 818 180x80x4 80x80x3 80x80x3 180x80x4 40x40x2 66 80x80x3 7 1032 2,00 1,79 14,96 3,5 440 9978S 863 180x80x4 80x80x3 80x80x3 180x80x4 40x40x2 66 80x80x3 7 1097 Recommendations are for information only for a frequency of 20 cycles per day with this dimensions B. For frequency over 20 cycles contact us.
HERCULE® HIGH PERFORMANCE SINGLE CARRIAGE 9952PAF Carriage equipped with reinforced ball bearings. For track: 9050. 9962PAF Carriage equipped with reinforced ball bearings. For track: 9060. 9972PAF Carriage equipped with reinforced ball bearings. For track: 9070. HIGH PERFORMANCE DOUBLE CARRIAGE 9958PAF Carriage equipped with reinforced ball bearings. For track: 9050. 9968PAF Carriage equipped with reinforced ball bearings. For track: 9060. 9978PAF Carriage equipped with reinforced ball bearings. For track: 9070. ALL CARRIAGES ARE EQUIPPED WITH WATERPROOF BEARINGS PAF series Carriages 9958PAF / 9968PAF 9978PAF 9952PAF / 9962PAF 9972PAF HEL STEEL TRACKS (HIGH ELASTIC LIMIT) Item Nr. Material Length Weight L H O e 9050/600* Galvanized steel** 6 m 35,5 Kg 65 60 18 3,5 9050N/600* Plain Steel 9060/600* Galvanized steel** 6 m 51,5 Kg 80 75 22 4,5 9060N/600* Plain Steel 9060/900* Galvanized steel** 9 m 77 Kg 9060N/900* Plain Steel 9070/600* Galvanized steel** 6 m 90 Kg 90 110 25 6 9070N/600* Plain Steel 9070/900* Galvanized steel** 9 m 135 Kg 9070N/900* Plain Steel CANTILEVER GATES ON STEEL TRACK DIMENSIONAL CHARACTERISTICS ** Our tracks uses the ZMg200 corrosion protection process. HIGH PERFORMANCE SINGLE CARRIAGE Item Nr. L H l R A B C D 9952PAF 151 98 100 42 100 135 60 92 9962PAF 191 153 130 81 130 185 90 135 9972PAF 230 205 170 99 170 230 130 170 HIGH PERFORMANCE DOUBLE CARRIAGE Item Nr. L H l R A B C D 9958PAF 297 117 130 61 130 235 90 100 9968PAF 379 153 150 81 150 310 110 165 9978PAF 429 206 200 99 200 360 160 260 A B C D Ø16 technical video 14 O e L H STEEL TRACK * Special lengths upon requests.
CANTILEVER GATES ON STEEL TRACK S series CARRIAGES ACCESSORIES SINGLE CARRIAGES WITH CENTRAL WHEEL OF ALIGNEMENT 9952S Carriage with steel wheels mounted on high-precision ball bearings. For track: 9050. 9962S Carriage with steel wheels mounted on high-precision ball bearings. For track: 9060. 9972S Carriage with steel wheels mounted on high-precision ball bearings. For track: 9070. DOUBLE CARRIAGES WITH CENTRAL WHEEL OF ALIGNEMENT 9958S Carriage with steel wheels mounted on high-precision ball bearings. For track: 9050. 9968S Carriage with steel wheels mounted on high-precision ball bearings. For track: 9060. 9978S Carriage with steel wheels mounted on high-precision ball bearings. For track: 9070. DIMENSIONAL CHARACTERISTICS 15 Item Nr. Designation 1050E Bottom end guide for track 9050 - L = 120 mm. 1060E Bottom end guide for track 9060 - L = 120 mm. 1070E Bottom end guide for track 9070 - L = 120 mm. 1051G End wheel for track 9050 - L = 149 mm. 1061G End wheel for track 9060 - L = 151.5 mm. 1071G End wheel for track 9070 - L = 150.5 mm. SINGLE CARRIAGES WITH CENTRAL WHEEL OF ALIGNEMENT Item Nr. L H l R A B C D 9952S 241 90 106 45 106 50 70 - 9962S 209 141 130 83 130 170 90 135 9972S 275 196 170 103 170 210 130 170 DOUBLE CARRIAGES WITH CENTRAL WHEEL OF ALIGNEMENT Item Nr. L H l R A B C D 9958S 300 140 150 83 150 150 110 60 9968S 430 145 150 83 150 200 110 165 9978S 560 196 200 103 200 300 160 260 R ±7 A B C D E Ø12 9958S 9962S 9972S 9952S 9968S 9978S 9952S 1051G/1061G/1071G 1050E /1060E/1070E
16 GEAR 9050GPAF Gear including: - 2 carriages 9952PAF - 2 end wheels 1051G - 2 bottom end guides 1050E - 2 upper guides 1062 TRACK 9050/600 Galvanized steel for carriages 9952PAF. Length = 6 m. 9050N/600 Plain steel for carriages 9952PAF. Length = 6 m. 1062 1050E 1051G 9050 9952PAF Steel cantilever gate structure: 9050GPAF SPECIAL GEAR FOR STEEL CANTILEVER GATE UP TO: 4 M WIDTH AND 200 KG. GEAR FOR STEEL CANTILEVER GATES HERCULE®
17 BOTTOM SLIDING GATES Needle bearing Ball bearing Wheel Round groove wheel Square groove wheel C C A E G F Ø P Ø Track D B E G F ROUND GROOVE SQUARE GROOVE CAST IRON WHEELS for round or square tracks CAST IRON WHEELS with ROUND GROOVE WHEEL Item Nr. Capacity /wheel Needle bearing Ball bearing F G Ø track Ø screw 1008GR 150 Kg 3 102 83 20 M 12x60 1009GR 250 Kg 3 150 123 30 M 20x100 1010GR 500 Kg 3 180 152 35 M 20x100 ROUND GROOVE WHEEL (galvanised steel side plates and cast iron rollers) Item Nr. Equipped with the wheel Capacity /wheel A B C D E Ø P 0980GR 1008GR 150 Kg 220 140 90 95 43 11 0990GR 1009GR 250 Kg 300 180 125 130 60 15 1000GR 1010GR 500 Kg 300 180 125 130 71 15 CAST IRON WHEELS with SQUARE GROOVE WHEEL Item Nr. Capacity /wheel Needle bearing Ball bearing F G Ø screw 1008GC 150 Kg 3 102 86 14x14 M 12x60 1009GC 250 Kg 3 150 124 25x25 M 20x100 1010GC 500 Kg 3 180 154 30x30 M 20x100 SQUARE GROOVE WHEEL (galvanised steel side plates and cast iron rollers) Item Nr. Equipped with the wheel Capacity /wheel A B C D E Ø P 0980GC 1008GC 150 Kg 220 140 90 95 43 11 0990GC 1009GC 250 Kg 300 180 125 130 60 15 1000GC 1010GC 500 Kg 300 180 125 130 71 15
HERCULE® 18 TRACKS AND STEEL WHEELS SCREWING TYPE TRACKS FOR ROUND GROOVE WHEEL - Galvanized steel - Length 3 m 20012RV/3 D = 12 / d = 8 / e = 2 / H = 10 / P = 6,5 / L = 60 20015RV/3* D = 15 / d = 11,5 / e = 1,8 / H = 14 / P = 6,5 / L = 56 20016RV/3 D = 15,5 / d = 10,5 / e = 2,5 / H = 16 / P = 6,5 / L = 60 20020RV/3 D = 19 / d = 12 / e = 3,5 / H = 15 / P = 8,5 / L = 80 20021RV/3 D = 19 / d = 13 / e = 3 / H = 16 / P = 6,5 / L = 60 JOINTING BRACKET 20015M for profile 20015RV/3 20016M for profile 20016RV/3 and 20020RV/3 20020M for profile 20021RV/3 & RS3 C L B F ØD E D A FOR EFFORTLESS FRICTION WE * maximum gate weight = 400 Kg ALL OUR WHEELS * Reinforced bearing ** The weight of the gate determines the choice of roller. STEEL WHEELS Round groove wheels "V" shape groove wheels Capacity /wheel** Capacity /bearing Ø D A B C Screw dimension - 20061V10 100 Kg 315 Kg 60 10 14 19 M10x45 20061R12 20061V12 100 Kg 315 Kg 60 12 16 19 M10x45 20061R16 - 100 Kg 315 Kg 60 16 20 32 M10x60 20081R12 20081V12 200 Kg 455 Kg 80 12 16 32 M14x70 20081R16 - 200 Kg 455 Kg 80 16 20 32 M14x70 20081R21 20081V20 200 Kg 455 Kg 80 21 25 32 M14x70 20101R12 20101V12 200 Kg 455 Kg 100 12 16 32 M14x70 20101R16 - 200 Kg 455 Kg 100 16 20 32 M14x70 20101R21 20101V20 200 Kg 455 Kg 100 21 25 32 M14x70 20100R21* 20100V20* 400 Kg 670 Kg 100 21 25 32 M14x70 20121R21 20121V20 225 Kg 455 Kg 120 21 25 32 M14x70 20120R21* 20120V20* 500 Kg 670 Kg 120 21 25 32 M14x70 20141R21 20141V20 250 Kg 455 Kg 140 21 25 32 M14x70 20140R21* 20140V20* 550 Kg 670 Kg 140 21 25 32 M14x70 20161R21 20161V20 300 Kg 455 Kg 160 21 25 32 M14x70 20160R21* 20160V20* 700 Kg 880 Kg 160 21 25 32 M16x70 20200R21* 20200V20* 750 Kg 880 Kg 200 21 25 32 M16x70 STEEL WHEELS - WELDING TYPE Round groove wheels Capacity /wheel** Capacity /bearing Ø D L A B C D E F 23081R16 200 Kg 455 Kg 80 80 16 20 34,5 60 18 44,5 23081R21 200 Kg 455 Kg 80 80 21 25 34,5 60 18 44,5 23101R16 200 Kg 455 Kg 100 100 16 20 34,5 76 22 44,5 23101R21 200 Kg 455 Kg 100 100 20 25 34,5 76 22 44,5 23100R21* 400 Kg 670 Kg 100 100 20 25 36,5 76 22 46,5 23121R21 225 Kg 455 Kg 120 120 20 25 34,5 96 22 44,5 23120R21* 500 Kg 670 Kg 120 120 20 25 36,5 96 22 46,5
FOR BOTTOM SLIDING GATES H 90° L Ø P e SCREWING TYPE TRACK FOR TRIANGULAR GROOVE WHEEL Galvanized steel - Length 3 m 20021VV/3 H = 17 / P = 6,5 / L = 65 / e = 3 Ø D e H 60° 19 D EASY and QUICK mounting, minimal space between the gate and the ground, welding or screwing type. to be fitted in a 40 mm section tube SEALING TYPE TRACK FOR ROUND GROOVE WHEEL Galvanized steel - Length 3 m 20021RS/3 D = 19 / e = 3 / H = 60 * Reinforced bearing ** The weight of the gate determines the choice of roller. RECOMMENDED TO USE OUR TRACKS ARE WHITE ZINC PLATED WHEELS WITH STEEL EXTERNAL PLATE Round groove wheels "V" shape groove wheels Capacity / wheel** Capacity /bearing Ø D L L1 A B C E 21081R16 - 200 Kg 455 Kg 80 120 90 16 20 40 46 21081R21 21081V20 200 Kg 455 Kg 80 120 90 21 25 40 46 21101R16 - 200 Kg 315 Kg 100 120 90 16 20 40 56 21101R21 21101V20 200 Kg 455 Kg 100 120 90 21 25 40 46 21100R21* 21100V20* 400 Kg 670 Kg 100 120 90 21 25 40 56 WHEELS WITH STEEL INTERNAL PLATE Round groove wheels "V" shape groove wheels Capacity /wheel** Capacity /bearing Ø D L L1 L2 A B C D E 22081R16 - 200 Kg 455 Kg 80 138 119 98 16 20 32 52.5 25.5 22081R21 22081V20 200 Kg 455 Kg 80 138 119 98 21 25 32 52.5 25.5 22101R16 - 200 Kg 455 Kg 100 138 119 98 16 20 32 69 35.5 22101R21 22101V20 200 Kg 455 Kg 100 138 119 98 21 25 32 69 35.5 22100R21* 22100V20* 400 Kg 670 Kg 100 138 119 98 21 25 32 69 35.5 22121R21 22121V20 225 Kg 455 Kg 120 186 162 138 21 25 32 73.5 45.5 22120R21* 22120V20* 500 Kg 670 Kg 120 186 162 138 21 25 32 73.5 45.5 22141R21 22141V20 250 Kg 455 Kg 140 186 162 138 21 25 32 89.5 48.5 22140R21* 22140V20* 550 Kg 670 Kg 140 186 162 138 21 25 32 89.5 48.5
HERCULE® 20 KITS FOR BOTTOM SLIDING GATES GEAR FOR SLIDING GATES WITH BALL BEARING WHEELS: 400 & 800 KG GEAR for 400 KG manual gate 20016RG Gear including: - 2 steel wheels with internal plate 22081R16 - 2 jointing brackets for profile 20016M - 2 upper-guides 1062 - 1 stopper screwing type 2099V - 1 lock 0957 ( 7) - 1 double handle 1295/60 ( 7) GEAR for 400 Kg motorized* gate 20116RG Gear including: - 2 steel wheels with internal plate 22081R16 - 2 jointing brackets for profile 20016M - 2 upper-guides 1062 - 1 stopper screwing type 2099V 16 mm Ø track for gates up to 400 Kg 20016RV/3 Galvanised steel track - Screwing type Length = 3 m - Width = 60 mm - Thickness = 2.5 mm 20 mm Ø track for gates up to 800 Kg 20021RV/3 Galvanised steel track - Screwing type Length = 3 m - Width = 60 mm - Thickness = 3 mm 20021RS/3 Galvanised steel track - Sealing type Length = 3 m - Width = 60 mm - Thickness = 3 mm 1062 20016M GEAR for 800 KG manual gate 20021RG Gear including: - 2 steel wheels with internal plate 22100R21 - 2 jointing brackets for profile 20020M - 1 upper-guide 1065 - 1 stopper screwing type 2099V - 1 lock 0957 ( 7) - 1 double handle 1295/60 ( 7) GEAR for 800 Kg motorized* gate 20121RG Gear including: - 2 steel wheels with internal plate 22100R21 - 2 jointing brackets for profile 20020M - 1 upper-guide 1065 - 1 stopper screwing type 2099V 0957 1295/60 2099V 22081R16 1062 20016M 2099 V 22081R16 1065 20020M 0957 1295/60 2099 V 22100R21 2099V 22100R21 20020M 1065 20016RV/3 / 20021RV/3 20021RS/3 20016 RG 20116 RG 20021RG 20121RG *motorisation is not included *motorisation is not included
SCREWING TYPE TRACKS FOR ROUND GROOVE WHEEL 20020RVX/3 STAINLESS STEEL track Ø 19 - Length = 3 m. 20020M Jointing bracket. SEALING TYPE TRACKS FOR ROUND GROOVE WHEEL 20021RSX/3 STAINLESS STEEL track Ø 19 - Length = 3 m. Ø 19 3 60 60° Jointing bracket for screwing type track (round groove wheel) STAINLESS STEEL TRACKS - Screwing and sealing type STAINLESS STEEL RANGE for bottom sliding gates 21 STAINLESS STEEL WHEELS on round tracks STAINLESS STEEL WHEELS Round groove wheels Capacity /wheel** Capacity /bearing Ø D A B C Screw dimension 20100R21X 400 kg 670 kg 100 21 25 32 M 14x70 20120R21X 500 kg 670 kg 120 21 25 32 M 14x70 WHEELS WITH STAINLESS STEEL INTERNAL PLATES Round groove wheels Capacity /wheel** Capacity /bearing Ø D L L1 L2 A B C D E 22100R21X 400 kg 670 kg 100 138 119 98 21 25 32 69 35.5 22120R21X 500 kg 670 kg 120 186 162 138 21 25 32 79.5 38.5 D STAINLESS STEEL ACCESSORIES lock 0954X see detail on page 24 lock 1290X see detail on page 24 guide 23040X see detail on page 26 ** The weight of the gate determines the choice of roller.
HERCULE® 22 LOCKS and HANDLES for BOTTOM SLIDING GATES HOOK LOCKS LEVER HANDLES and PULLS HOOK LOCKS with 8 mm square Item Nr. Designation 0954 Hook lock in galvanised steel. Supplied with European Cylinder and 3 keys. A = 96 ; B = 60 ; C = 174 0954X Hook lock in stainless steel. Supplied with European Cylinder and 3 keys. A = 96 ; B = 60 ; C = 174 0955 Monoblock lock, in galvanised steel. Supplied with a strike without cylinder. A = 96 ; B = 60 ; C = 174 0954C40 Box for lock 0954 and 0955. For a 40 mm tube. A = 65 ; B = 20 ; C = 40 0954C50 Box for lock 0954 and 0955. For a 50 mm tube. A = 65 ; B = 10 ; C = 50 LEVER HANDLES FOR LOCKS with 8 mm square 1295/50 Double handle in Zamak. For 25 to 40 mm tubes. Cone-point set screw - 8 mm square. 1295/70 Ditto for 30 to 70 mm tubes. LEVER HANDLES FOR LOCKS with 7 mm square 1295/60 Handle in white painted aluminium. For 30 to 70 mm tubes. 7 mm square (For locks Nr 0957). Screwing type HANDLES 1290 Dished flush pull in galvanized steel handle. Height = 200 mm - width = 90 mm. 1290X Ditto in stainless steel. 1297 Handle on a 265 mm plate in galvanized steel. 1298 Pressed handle with fastening hooks in galvanized steel. Length = 245 mm. HOOK LOCKS with 7 mm square Item Nr. Designation 0957 Frame and mechanism in stainless steel, sliding bolt and end section in STAINLESS STEEL. Handle plates white prepainted aluminium. Keeper of lock in white prepainted brass. For European profile cylinder of 54 mm. 0954 0955 0954C 44 15 12 2 x Ø5.5 pour la fixation B 16 25 C 4 130 35 41 A Ø12 54 59 210 25 30 72 8x8 B A 72 C 175 1290 1297 1298 1295 cylindre européen. CARRE 7X7 Béquille Ref 1295-60 en zamak RAL 9016 pour tube de 30 à 60 228 42 Ø8 Ø5,5 28 172 24 11 2 65,5 70 20 1295/60 0957 76 41 Ø9 89 9 2099V 2099 STOPPERS STOPPERS 2099 Galvanized stopper, welding type. For bottom sliding gates. 2099V Ditto screwing type.
ACCESSORIES for BOTTOM SLIDING GATES 23 1053 1052 330 67 mini 275 maxi Ø50 45 D B A C 30 à 62 1050 1059 1064 1062 23025 23030 23040 1115/600 23040B 1065 OCP 23050B 1092W PEG-E PEG-E 1115 1708PL 1708PLC 2222CR 3012CR C0003380 GUIDES - SQUARE PILLARS COVERS GUIDES Item Nr. Designation 1052 Adjustable upper guide, sealing type. For bottom sliding gate. Equipped with guide 1050. 1052L Ditto equipped with the guide 23040L. 1053 Adjustable upper guide, screwing type. For bottom sliding gate. Equipped with the guide 1050. 1053L Ditto equipped with the guide 23040L. 1050 Guide without plate mounted on needle bearing with a nylon olive. Installed on the guides 1052 and 1053. Ø 50 - Height = 25 mm 1092W Adjustable upper guide, screwing type. For tubes up to 50 mm. Equipped with the guide 23050B. 1059 Lower guide mounted on needle bearing with a nylon olive and fixed on a screwing plate. For U 50 x 60. Ø 50 - Height = 25 mm. 1115/600 U-profile 50 x 60 in galvanized steel. Length = 6 meters. PEG-E Upper guide (Ø 50). For U-profile 1115 23025 Guide with a nylon olive. A = 65 - B = 25 - C = 35 - D = 14 23030 Guide with a nylon olive. A = 80 - B = 30 - C = 40 - D = 14 23040B Guide with a convex nylon olive. A = 84 - B = 40 - C = 40 - D = 14 23040 Guide with a nylon olive. A = 84 - B = 40 - C = 40 - D = 14 23040L Long guide with a nylon olive. A = 102 - B = 40 - C = 60 - D = 16 23040X Guide with a stainless steel shaft and a nylon olive. A = 84 - B = 40 - C = 40 - D = 14 23050B Guide with a convex nylon olive. A = 71 - B = 49 - C = 50 - D = 10 1062 Upper guide with two adjustable nylon olives, Ø 40 for 40 to 70 mm tube. Length = 105 mm. 1064 Upper guide with four adjustable nylon olives, Ø 40 for 40 to 70 mm tube. Length = 245 mm. 1065 Adjustable upper guide with four adjustable nylon olives, Ø 40 for 40 to 60 mm tube. Length = 220 mm. OCP20 Square steel pillar cover to be welded, 20 x 20 mm. OCP30 Ditto 30 x 30 mm. OCP40 Ditto 40 x 40 mm. OCP50 Ditto 50 x 50 mm. OCP60 Ditto 60 x 60 mm. OCP80 Ditto 80 x 80 mm. OCP100 Ditto 100 x 100 mm. OCP120 Ditto 120 x 120 mm. OCP150 Ditto 150 x 150 mm. C0003380 M4K nylon rack with steel core. L = 1 m. 2222CR Rack for motorized gates. Length = 1 m. Module 4 - 22mm x 22 mm in galvanized steel. 3012CR Rack for motorized gates. Length = 1 m. Module 4 - Drilled for a M8 screw - 30 mm x 12 mm in galvanized steel. 3 pins/rack. 1708PL Pins in galvanized steel for rack fixing. Screw M8. Height = 27 mm. 1708PLC Ditto height = 16 mm.
24 GATES MOUNTED ON HINGES HERCULE® ADJUSTABLE HINGES FOR PANELS UP TO 200 KG HINGES - WELDING TYPE Item Nr. A R C D E Panel weight (kg) 25163 76 10 à 30 25 M16 34 100 25183 80 12 à 34 25 M18 34 150 25203 84 14 à 38 25 M20 34 150 HINGES - SEALING TYPE Item Nr. A R C D E Panel weight (kg) 25162 60 42 à 60 25 M16 38 80 25182 64 42 à 62 25 M18 38 100 25202 75 40 à 62 25 M20 38 100 HINGES - SCREWING TYPE Item Nr. A B C D E Panel weight (kg) 25163L 172 125 25 M16 38 100 25183L 182 135 25 M18 38 150 25203L 192 143 25 M20 38 200 HINGES ON PLATE Item Nr. A B R C D E F Panel weight (kg) 25165 80 76 25 à 34 25 M16 42 35 100 25185 100 80 25 à 38 25 M18 42 35 150 25205 100 84 25 à 42 25 M20 42 35 150 HINGES - SCREWING TYPE Item Nr. A B C D E Panel weight (kg) 25163SOL 170 125 25 M16 38 100 25183SOL 180 135 25 M18 38 150 25203SOL 190 143 25 M20 38 200 D R A E C D B A E C D B A E C C D R A E B A C D R F E
25 25040V 25050V 25040S 25050S ALL PIVOTS ARE EQUIPPED WITH A GREASER PIVOTS WITH BRACKETS for panels up to 80 KG 25040S Pivot for panel in 40 tube, sealing type. Pivot 35 mm 25040V Pivot for panel in 40 tube, screwing type. 25050S Pivot for panel in 50 tube, sealing type. Pivot 45 mm 25050V Pivot for panel in 50 tube, screwing type. opening 180° ! GATES MOUNTED ON PIVOTS AND HINGES F G D E H R C L=120 A B HINGES - WELDING TYPE opening 180° Item Nr. A B R C D E F G H Panel weight (kg) 25164SO 50 100 65 to 83 42 M16 40 42 22 8 80 25184SO 50 100 60 to 80 42 M18 40 42 22 8 100 25204SO 50 100 60 to 80 42 M20 40 42 22 8 100
26 GATES MOUNTED ON PIVOTS WITH BALL BEARINGS HERCULE® Ø D Ø E Ø D A B F C Ø D Ø E Ø D A B F PIVOT WITH BALL BEARING FOR PANELS WEIGHING UP TO 750 KG ADJUSTABLE PIVOTS - WELDING TYPE Item Nr. Designation 25051X Stainless steel pivot Ø 50, with welding fastener for heavy manual or motorized panels. Adjustable on the upper part. Including: - upper part - lower part 25051 Galvanized steel pivot Ø 50, with welding fastener for heavy manual or motorized panels. Adjustable on the upper part. Including: - upper part - lower part 25051B Lower part of pivot 25051. 25051H Partie haute du pivot 25051. 25071 Galvanized steel pivot Ø 70, with welding fastener for heavy manual or motorized panels. Including: - upper part - lower part 25071B Lower part of pivot 25071. 25071H Upper part of pivot 25071. ADJUSTABLE PIVOTS - SCREWING TYPE 25052 Galvanized adjustable steel pivot Ø 50 with "L" screwing fastener, for heavy manual or motorized panels. Including: - upper part - lower part The screws enable an adjustment on both upper and lower part. 25052B Lower part of pivot 25052. 25052H Upper part of pivot 25052. 25072 Galvanized steel pivot Ø 70 with "L" fastener, for heavy manual or motorized panels. Including: - upper part - lower part The screws enable an adjustment on both upper and lower parts. 25072B Lower part of pivot 25072. 25072H Upper part of pivot 25072. PIVOTS 25051 and 25052 Max. panel weight (Kg) according to width "L" and height "H" H L 1.5 m 2 m 2.5 m 3 m 3.5 m 4 m 4.5 m 5 m 1 m 350 350 300 250 214 187 166 150 1.5 m 350 350 350 350 320 280 250 225 2 m 350 350 350 350 350 350 333 300 2.5 m 350 350 350 350 350 350 350 350 3 m and + 350 350 350 350 350 350 350 350 PIVOTS 25071 and 25072 Max. panel weight (Kg) according to width "L" and height "H" H L 1.5 m 2 m 2.5 m 3 m 3.5 m 4 m 4.5 m 5 m 5.5 m 6 m 1 m 750 750 600 500 428 375 333 300 272 250 1.5 m 750 750 750 750 643 562 500 450 409 375 2 m 750 750 750 750 750 750 666 600 545 500 2.5 m 750 750 750 750 750 750 750 750 681 625 3 m et + 750 750 750 750 750 750 750 750 750 750 Item Nr. A B ØD ØE F 25051X 100 50 50 25 77±7 25051 100 50 50 25 77±7 25071 120 60 70 30 97±7 Item Nr. A B C ØD ØE F 25052 110 50 60 50 25 85±7 25072 130 60 60 70 30 108±7
27 Item Nr. Designation 1297 Handle on a 265 mm plate in galvanized steel. 1298 Pressed handle with fastening hooks in galvanized steel. Length = 245 mm. 1314 Reinforced cane bolt. Screwing type. Length = 300 mm - Ø 14 mm. 1314E Reinforced narrow cane bolt 23 mm. Screwing type. Removable pin (2 positions). Length = 300 mm - Ø 14 mm. 1314EF Mounting kit for narrow reinforced cane bolt 23 mm (1314E and 1316E). Comprising 2 screw TF M8x30 and 2 inserts. 1314SO Cane bolt to weld, welding type. Length = 300 mm - Ø 14 mm. 1316 Reinforced cane bolt, screwing type. Height = 500 mm - Ø 16 mm. 1316E Reinforced narrow cane bolt 23 mm. Screwing type. Removable pin (2 positions). Length = 500 mm - Ø 16 mm. 1316SO Cane bolt to weld, welding type. Length = 500 mm - Ø 16 mm. 1316B Barrel bolt with cast iron chassis and steel cane and steel keeper. Weight = 660 gr. - Ø 16 mm. 1314GP Keeper of bolt for 1314 and 1314SO. 1316GP Keeper of bolt for 1316 and 1316SO. 1314GE Keeper of bolt for 1314 and 1314SO. Inlet type. 1316GE Keeper of bolt for 1316 et 1316SO. Inlet type. 1303S Adjustable swing gate stop with cataphoresis protection, sealing type. Adjustment = 40-70 mm. Height = 50 mm; Width = 40 mm; Length = 145 mm. 1303V Adjustable swing gate stop in galvanized steel, sealing type. Adjustment = 40-70 mm. Height = 120 mm; Width = 40 mm; Length = 145 mm. 2090S Middle gate stop, sealing type. Height = 85 mm; Width = 60 mm; Length = 100 mm. 2090V Middle gate stop, screwing type. Width = 60 mm; Length = 100 mm. 2097S Middle gate stop, sealing type. Height = 115 mm; Width = 100 mm; Length = 160 mm. 2097V Middle gate stop, screwing type. Height = 40 mm; Width = 100 mm; Length = 140 mm. ACCESSORIES for BOTTOM SLIDING GATES 1297 1298 1314SO 1316SO 1314GE/1316GE 1314GP/1316GP 1303S 2090 S 2090V 2097S 2097V 1303V 1316B 1314E 1316E 1314 1316 1314EF
28 INVISIBLE DOOR CLOSER HERCULE® INVISIBLE DOOR-CLOSER CLOSING PIVOT KITS FOR DOORS Item Nr. Designation 25312DT 25312GT 85 kg Single action 180° pivot, integrable into tubular section from 40 mm, for doors up to 1000 x 2000 max. delivered with a top pivot (special for door). 16 N/m closing strength. 25312DT: right opening 25312GT: left opening 25322DT 25322GT 200 kg Single action 180° pivot, integrable into tubular section from 50 mm, for doors up to 1800 x 2400 max. delivered with a top pivot (special for door). 49 N/m closing strength. 25322DT: right opening 25322GT: left opening CLOSING PIVOT KITS FOR GATES 25312DT52 25312GT52 85 kg Set including: 25312DT invisible door closer reference and top pivot, screwing type. Integrable into tubular section from 40 mm, for doors up to 1000 x 2000 max. 25312DT52: right opening 25312GT52: left opening 25312DT51 25312GT51 85 kg Set including: 25312DT invisible door closer reference and top pivot, welding type. Integrable into tubular section from 40 mm, for doors up to 1000 x 2000 max. 25312DT51: right opening 25312GT51: left opening Capacity per door RIGHT OPENING LEFT OPENING DOOR CLOSING PIVOT KITS for doors DOOR CLOSING PIVOT KITS for gates Top pivot, screwing type Top pivot, welding type ou Top pivot, special for door Top pivot, screwing type Bottom door closer THERMOCONSTANT line next generation system: no more inter-seasonal adjustments very low variation in closing times because of changes in temperature Bottom door closer Bottom door closer © Normaclo gate
RkJQdWJsaXNoZXIy ODAxNzY=