211A

CATALOGUE SPORTUB 211A

2 We offer you the widest range of fittings for sliding doors MANTION HAS AN INTERNATIONAL REPUTATION BASED ON: innovation and a permanent adaptation of its range of products to its customers’ needs. a quality product, which responds to the requirements of the strictest standards. THE MANTION KNOW-HOW MEANS BEFORE ALL: its team: people with experience and great skills who do their best to keep bringing you the best service. its permanent investment policy combined to the newest technologies. WITH MANTION, YOU BENEFIT FROM A TOP QUALITY SERVICE: Salesmen who listen to your needs and advise you. A strong technical aid: an engineering department and technical advisers at your disposal. The study and the development of special products upon request. Very short delivery time. Very high quality products. MANTION, THIS IS ALSO A COMPLETE RANGE: Fittings for sliding and folding doors. Fittings for sectional doors. Fittings for glass doors. Fittings in stainless steel quality A2 and A4. Since MANTION has always cared about bringing you the best services within its organization and quality for its products, it is now up to standard: EN ISO 9001: 2015 EN ISO 14001: 2015 Authorised by SGS ICS 29, avenue Aristide Briand 94111 Arcueil Cedex France t +33 (0)1 41 24 87 75 f +33 (0)1 73 01 71 29 www.sgs.com Page 1 of 1 Certificate FR15/81841903 The management system of MANTION SAS 7 rue Gay Lussac 25000 Besançon France has been assessed and certified as meeting the requirements of ISO 9001:2015 For the following activities Concept, production and sales of armatures for sliding doors and air transportation systems. This certificate is valid from 27 August 2018 until 26 August 2021 and remains valid subject to satisfactory surveillance audits. Issue 2. First Certification date January 2006 Authorised by SGS ICS 29, avenue Aristide Briand 94111 Arcueil Cedex France t +33 (0)1 41 24 87 75 f +33 (0)1 73 01 71 29 www.sgs.com Page 1 of 1 This document is issued by the Company subject to its General Conditions of Certification Services accessible at http://www.sgs.com/en/Terms-and-Conditions. Attention is drawn to the limitations of liability, indemnification and jurisdictional issues established therein. The authenticity of this document may be verified at http://www.sgs.com/clients/certified_clients.htm. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Certificate FR15/81841904 The management system of MANTION SAS 7 rue Gay Lussac 25000 Besançon France has been assessed and certified as meeting the requirements of ISO 14001:2015 For the following activities Concept, production and sales of armatures for sliding doors and air transportation systems. This certificate is valid from 27 August 2018 until 26 August 2021 and remains valid subject to satisfactory surveillance audits. Issue 2. First Certification date August 2009 MANTION ®

3 TRACKS OF QUALITY MANTION manufactures its tracks at its factory in Besançon according to its own production process. This ensures a long durability and an optimal reliability of its hardware products. 7, rue Gay Lussac - ZI de Trépillot - F-25000 BESANÇON - Phone.: +33 3 81 85 38 73/74 - Fax: +33 3 81 53 29 76 Web: http://www.mantion.com - Email: export@mantion.com

4 MANTION ® THE EUROPEAN STANDARD EN 1527 grade 1 grade 2 grade 3 grade 4 grade 5 24 h* 48 h* 96 h* 240 h* 480 h* *Numbers of hours of resistance to salt spray (Standard EN1670) grade 1 grade 2 grade 3 grade 4 grade 5 grade 6 5 000 c* 10 000 c* 25 000 c* 50 000 c* 75 000 c* 100 000 c* *Number of cycles grade 1 grade 2 grade 3 Door of 50 Kg 50 N* 30 N* 10 N* Door from 51 to 100 Kg 80 N* 50 N* 20 N* Door from 101 to 330 Kg 90 N* 60 N* 30 N* Door over 330 Kg 5 %** 3 %** 2 %** *(10N): 10 newton correspond to a force of approx. 982 g to start movement of panel **Percentage of the mass DURABILITY [D] INITIAL FRICTION [F] CORROSION RESISTANCE [C] Mantion certifies* the performance of its fittings for sliding doors and gives you the guaranty of high quality products. The different Mantion products have been designed, produced and tested to be used together. In order to avoid any technical problem or early use of fittings, require MANTION products. * This guaranty of durability applies to complete sets of Mantion products: tracks, rollers, brackets, stops and guides which are used and installed according to Mantion instructions (capacity and number of cycles). A safety insurance regarding the performance of fittings for sliding doors: Simple and efficient: By requiring the characteristics of a product according to the European standard, you will avoid inconvenience such as bad sliding, blocking or early wearing. What does the European standard EN 1527 indicate? It defines objective quality criteria for a complete set of fittings for sliding doors (tracks, brackets, rollers, stops and guides): - Corrosion resistance (resistance to salt spray) - Durability (number of cycles) - Initial friction (initial max. force required to open and close the panels) It determines the conditions in which the tests have to be made. This allows an easy and real comparison between different competing products: - Door under 200 kg Height: 2 meters Width: 0.80 meters - Door over 200 kg Height: 2 meters Width: 2 meters It indicates the performance of fittings according to the tests results: MADE IN FRANCE since 1920 EU STANDARD Authorised by SGS ICS 29, avenue Aristide Briand 94111 Arcueil Cedex France t +33 (0)1 41 24 87 75 f +33 (0)1 73 01 71 29 www.sgs.com Page 1 of 1 This document is issued by the Company subject to its General Conditions of Certification Services accessible at http://www.sgs.com/en/Terms-and-Conditions. Attention is drawn to the limitations of liability, indemnification and jurisdictional issues established therein. The authenticity of this document may be verified at http://www.sgs.com/clients/certified_clients.htm. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Certificate FR15/81841904 The management system of MANTION SAS 7 rue Gay Lussac 25000 Besançon France has been assessed and certified as meeting the requirements of ISO 14001:2015 For the following activities Concept, production and sales of armatures for sliding doors and air transportation systems. This certificate is valid from 27 August 2018 until 26 August 2021 and remains valid subject to satisfactory surveillance audits. Issue 2. First Certification date August 2009 Authorised by SGS ICS 29, avenue Aristide Briand 94111 Arcueil Cedex France t +33 (0)1 41 24 87 75 f +33 (0)1 73 01 71 29 www.sgs.com Page 1 of 1 This document is issued by the Company subject to its General Conditions of Certification Services accessible at http://www.sgs.com/en/Terms-and-Conditions. Attention is drawn to the limitations of liability, indemnification and jurisdictional issues established therein. The authenticity of this document may be verified at http://www.sgs.com/clients/certified_clients.htm. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Certificate FR15/81841903 The management system of MANTION SAS 7 rue Gay Lussac 25000 Besançon France has been assessed and certified as meeting the requirements of ISO 9001:2015 For the following activities Concept, production and sales of armatures for sliding doors and air transportation systems. This certificate is valid from 27 August 2018 until 26 August 2021 and remains valid subject to satisfactory surveillance audits. Issue 2. First Certification date January 2006 calculated without the use of damper closer or hydraulic closer stop corrosion fri cti on durability D 6 C F 2 3 100 000 cycles

5 200 & 2200® Fittings for STRAIGHT sliding doors 6 For doors up to 80 kg maxi. For doors up to 150 kg maxi. For doors up to 400 kg maxi. For doors up to 1200 kg maxi. For doors up to 2000 kg maxi. SPORTUB sets 300® Fittings for LATERAL sliding doors 20 With fixing type hinges With welding type hinges 500® Fittings for FOLDING doors with equal panels 26 With fixing type hinges With welding type hinges 600® Fittings for FOLDING doors with a half panel 32 4000® Fittings for UP AND OVER doors 36 For residential use For industrial use 7000® Fittings for SECTIONAL doors (industrial use) 43 SPORT® Fittings for STRAIGHT sliding doors on a flat track 47 BOB® Fittings for LATERAL sliding doors on a flat track 51 BOB 50 BOB 100 TRACKS & ACCESSORIES 56 Tracks & profiles Fixing and jointing brackets Fixing plates Accessories Guides HANDLING WITH MONORAILS 62 INOX RANGE 64 THE MANTION RANGES 65 INDEX 66 SUMMARY This document is not contractual. All specifications can be modified without notice.

6 SPORTUB ® 25 mm 63/64” 25 mm 63/64” 20 mm 25/32” 15 mm 19/32” 70 mm - 2 3/4” 3.5 mm 9/64” 2.5 mm 3/32” 55 mm - 1 31/32” 62 mm - 2 7/16” 50 mm - 1 31/32” 35 mm - 1 3/8” 85 mm - 3 11/32” 8 mm 5/16” 18 mm 45/64” 18 mm 45/64” 30 mm - 1 3/46” 5 mm 13/64” 5 mm 13/64” 1.5 mm 1/16” 7 mm 9/32” 11.5 mm 29/64” 11.5 mm 29/64” 19 mm 3/4” 11.5 mm 29/64” 14.5 mm 37/64” 14.5 mm 37/64” 2 mm 5/64” 40 mm - 1 37/64” 3530 5040 6255 8570 for doors up to 80 Kg for doors up to 150 Kg for doors up to 400 Kg for doors up to 2000 Kg In order to guaranty high quality systems, Mantion manufactures its own profiles: Mantion can therefore improve the reliability of its products and bring the best quality sliding systems on the market: 3 bending and roll forming machines enable Mantion to roll any metal thickness up to 6 mm at a short time notice This also enables Mantion to produce special lengths on request and within a short delivery time. All the Mantion profiles are coated with magnesium zinc (without chromium) in order to preserve all the qualities to all weather. Number of hours of resistance to salt spray and red rust: 800 h !! The track 8570 is made of steel of High Limit of Elasticity. This ensures better resistance and durability.     SPORTUB TRACKS

7 Sliding systems for STRAIGHT SLIDING DOORS 200® & 2200® series For doors up to 80 kg 8-9 For doors up to 150 kg 10-11 For doors up to 400 kg 12-13 For doors up to 1200 kg 14-15 For doors up to 2000 kg 16-17 SPORTUB sets 18-19

8 SPORTUB ® • Easy and long-lasting running • Stable system: the hangers are designed to be constantly in contact with the track • All hangers are electrolytically treated • The 0235A and 0235D hangers mounted on needle roller bearings are a unique Mantion system • The hanger 2235 is mounted on ball bearings • Hangers can be mounted in 2 different ways: on the side or on the top TRACKS Item Nr Designation Pack. 3530/400 Galvanised track 35 x 30 mm - 4 m long. 4 3530/500 Ditto 5 m long. 4 3530/600 Ditto 6 m long. 4 3530 0235A - 0235D STRAIGHT sliding doors CAPACITY/DOOR: 80 kg TRACK: 3530 MOVEMENT: STRAIGHT HANGERS & PLATES 0235A 80 kg Hanger, top fixing with 2 steel wheels mounted on needle roller bearings. 2 0235D Hanger, top fixing with 2 Delrin wheels mounted on needle roller bearings. 2 2232 Hanger with swan-neck, with 4 steel wheels mounted on ball bearings. 2 2235 Hanger top fixing, with 4 steel wheels mounted on ball bearings. 2 0036 Top fixing plate, Ø M 10. 20 0036W "U" plate for top fixing, Ø M 10. 40 0037 Angle plate for side fixing, Ø M 10. 10 0031 Adjustable APRON SET, 25 to 35 mm thickness. Capacity: 40 Kg 10 2232 2235 0037 0036 0031 0036W GUIDES 1109/400 U-profile 25 x 17 mm, galvanised - 4 meter long 4 1109/500 Ditto 5 m long. 4 1109/600 Ditto 6 m long. 4 1102 Bottom guide with an olive mounted on a round ended screwing plate for U-profile 25 x 17 mm. See dimensions and assembly instructions on p. 60 20 1102 1109 capacity per door SLIDSOFT: our SLIDSOFT calculation software in order to make easier your technical details www.mantion.com

Welded bolt M10 A A 8 mm - 5/16” R2 1,5 mm - 1/16” 10 mm - 25/64” 10 mm - 25/64” 10 mm - 25/64” 3 mm - 1/8” 22 mm - 55/64” 20 mm - 25/32” 20 mm - 25/32” 20 mm - 25/32” 20 mm - 25/32” M10x55 87 mm - 3 27/64” 41 mm - 1 39/64” 35 mm - 1 3/8” 30 mm - 1 3/16” 30 mm - 1 3/16” M10x55 77 mm - 3 1/32” 30 mm - 1 3/16” 35 mm - 1 3/8” 41 mm - 1 39/64” 30 mm - 1 3/16” M10x55 65 mm - 2 9/16” 30 mm - 1 3/16” 35 mm - 1 3/8” 35 mm - 1 3/8” 38 mm - 1 1/2” 38 mm - 1 1/2” 80 KG M10x55 95 mm - 3 47/64” 77 mm - 3 31/32” 30 mm - 1 3/16” 35 mm - 1 3/8” 62 mm - 2 7/16” 30mm to 60 mm 1 3/16” to 2 23/64” 30 mm - 1 3/16” 13 mm - 33/64” Hangers 0235 A & 0235D Hanger 2232 Hanger 2235 Plate 0037 95 mm - 3 47/64” 28 mm - 1 7/64” 62 mm - 2 7/16” 2.5 mm - 3/32” 16 mm - 5/8” M10 65 mm - 2 9/16” 25 mm - 55/64” 45 mm - 1 49/64” 33 mm - 1 19/64” R30 R30 3 Tf 4 3 4.5 Apron set 0031  M 10  5 56 mm - 2 13/64” 80 mm - 3 5/32” 1.5 mm - 1/16” 7.8 mm - 5/16” min. 25 mm 63/64” max. 35 1 3/8” Plate 0036 Plate 0036W Threaded hole M 10 100 mm - 3 15/10” 2,5 mm - 3/32” 25 mm - 63/64” 6,2 mm - 1/4” 7,5 mm 19/64” 10 mm - 25/64” R12,5 18 mm - 45/64” 18 mm - 45/64” 10 mm - 25/64” 22 mm - 55/64” 22 mm - 55/64” 200 & 2200 series corrosion fri cti on durability D 6 C F 2 3 100 000 cycles 9

10 SPORTUB ® TRACKS Item Nr Description Pack. 5040/400 Galvanised track 50 x 40 mm - 4 m long 5040/500 Ditto 5 m long 5040/600 Ditto 6 m long 0255 HANGERS & PLATES 0251A 150 kg Hanger side-fixing, with 2 steel wheels mounted on needle roller bearings 2 0251D Hanger side-fixing with 2 Delrin wheels mounted on needle roller bearings 2 0255A Hanger top-fixing, with 2 steel wheels mounted on needle roller bearings 2 0255AL Ditto with long fixing bolt (123 mm). 2 0255D Hanger top fixing with fixing bolt and 2 Delrin wheels mounted on needle roller bearings 2 0255DL Ditto with long fixing bolt (123 mm). 2 02252 Hanger with swan-neck, with 4 steel wheels mounted on ball bearings. 2 02255 Hanger, top fixing, with 4 steel wheels mounted on ball bearings. 2 02255L Ditto with long fixing bolt (123 mm). 2 0055 Welding type plate 10 0056 Screwing type plate for top fixing, Ø M 12. 10 0056W Screwing «U» plate, for top fixing, Ø M 12. 10 0051 Adjustable apron set for panels from 40 to 50 mm thickness. Capacity: 75 kg. Top fixing, screwing type 10 2252 2255 0055 0056 0056W 0051 0251 CAPACITY/DOOR: 150 kg TRACK: 5040 MOVEMENT: STRAIGHT GUIDES 1110/400 U-profile 30 x 30 mm, galvanised - 4 m long 4 1110/500 Ditto 5 m long 4 1110/600 Ditto 6 m long 4 1099 Bottom guide with olive on a round ended screwing plate, for U-profile 30 x 30 mm See dimensions and assembly instructions on p. 60 10 1099 capacity per door • Easy and long-lasting running • Stable system: the hangers are designed to be constantly in contact with the track • All hangers are electrolytically treated • A complete range of hangers: straight or with swan-neck, with 2 wheels mounted on needle roller bearings or 4 wheels mounted on ball bearings. Steel or Delrin wheels • For special mounting: «L» version hangers with a long fixing bolt (70 mm longer than the normal version) STRAIGHT sliding doors SLIDSOFT: our SLIDSOFT calculation software in order to make easier your technical details www.mantion.com 5040 1110

M12 75 mm - 2 61/64” 40 mm - 1 37/64 50 mm - 1 31/32” 49 mm - 1 59/64” 64 mm - 2 33/64” 50 mm - 1 31/32” 49 mm - 1 59/64” M12x70 40 mm - 1 37/64” 50 mm - 1 31/32” 104 mm - 4 3/32” 34 mm 1 11/32” 53 mm - 2 3/32” 48 mm (standard) 157/ 64 inch 118 mm (L version) 441/ 64 inch M12x70 116 mm - 4 9/16” 40 mm - 1 37/64” 50 mm - 1 31/32” 48 mm (standard) 1 57/64” 118 mm (L version) 4 41/64” 32 mm - 1 17/64” Hangers 0255A & 0255D - 0255AL & 0255DL Hanger 2252 Hanger 2255 & 2255 L Ø8,5 110 116 mm - 4 9/16” 50 mm 1 31/32” 40 mm - 3 27/64” 162 mm - 6 3/8” 20 mm 1 25/32” 43,5 mm 1 23/32” 77 mm - 3 1/32” 15mm - 19/32” 4mm - 5/32” 20 mm -25/32” 44 mm 1 47/64” Hangers 0251A & 0251D Plate 0055 Apron set 0051  M 12  5.5 75 mm - 2 61/64” 100 mm - 3 15/16” 1.8 mm - 5/64” min. 40 mm 1 37/64” max. 50 mm 1 31/32” 8.4 mm - 21/64” Plate 0056 Plate 0056W 160 mm - 6 19/64” 25 mm - 63/64” R1,5 19 mm - 3/4” Ø15 23 mm 29/32” 25 mm 63/64” 80 mm - 3 5/32” 10,5 mm - 13/32” 14,5 mm - 37/64” Ø5,8 11 mm 7/16” 25 mm - 63/64” 7 mm - 9/32” 20 mm - 25/32” 10 mm - 25/64” 2 mm - 5/64” Welded bolt M12 Threaded hole M12 170 mm - 6 11/16” 4 mm - 5/32” 18 mm - 45/64” 12 mm - 15/32” 12 mm - 15/32” 30 mm - 1 3/16” 15 mm - 19/32” 35 mm - 1 3/8” 35 mm - 1 3/8” 35 mm - 1 3/8” 35 mm - 1 3/8” 90 mm - 3 35/64” 20 mm - 25/32” 35 mm - 1 3/8” 13 mm - 33/64” 7 5 mm 13/64” 150 KG 200 & 2200 series corrosion fri cti on durability D 6 C F 2 3 100 000 cycles 11

12 SPORTUB ® TRACKS Item Nr Description Pack. 6255/400 Galvanised track 62 x 55 mm, thickness 25/10e 4 m long 6255/500 Ditto 5 m long 6255/600 Ditto 6 m long 6255GE/600 Galvanised track 62 x 55 mm, thickness 20/10e 6 m long 0261 HANGERS & PLATES 0261 300 kg Hanger, side fixing, with wheels mounted on needle roller bearings. Removable plate, which enables 2 different positions and an adaptation to 2 different panel thicknesses. 2 0265 Hanger top fixing, with 2 steel wheels mounted on needle roller bearings. Fixing bolt: 50 mm. 2 0265L Ditto with long fixing bolt (120 mm). 2 0265D Hanger top fixing, nylon + glass fiber wheels mounted on needle roller bearings. 2 2262 Hanger with swanneck, 4 nylon + glass fiber wheels with ball bearings. 2 2265 Hanger, top fixing, 4 nylon +glass fiber wheels with ball bearings. 2 2265L Ditto with long fixing bolt (120 mm). 2 2262A 400 kg Hanger, top fixing, 4 steel wheels with ball bearings. 2 2265A Hanger, top fixing, 4 steel wheels with ball bearings. 2 2265AL Ditto with long fixing bolt (120 mm). 2 0065 Plate, welding type 10 0066 Plate, screwing type for top fixing, Ø M 14. 10 0061 Adjustable apron set for panels from 50 à 65 mm thick. Capacity: 150 kg. Top fixing, screwing type 2 0265 2265 0065 0066 0061 CAPACITY/DOOR: up to 400 kg TRACK: 6255 MOVEMENT: STRAIGHT GUIDES 1110/400 U-profile 30 x 30 mm, galvanised. 4 m long 4 1110/500 Ditto 5 m long 4 1110/600 Ditto 6 m long 4 1101 Bottom guide with olive fixed on a screwing type reinforced plate (square ends) - For U-profile 30 x 30 mm See dimensions and assembly instructions on p. 60 10 1101 Capacity per door: grade 6 (100 000 cycles) for the 6255 track (thickness 25/10 ) grade 3 ( 10 000 cycles) for the 6255 GE track (thickness 20/10) • 2 types of tracks: 20/10e and 25/10e thicknesses • Ingenious: thanks to its offset bracket, the 261 hanger enables the centred mounting of doors of different thicknesses • The steel hangers with ball bearings (2265A) are suitable for fire doors • For special mounting: «L» version hangers with a long fixing bolt (70 mm longer than the normal version) STRAIGHT sliding doors SLIDSOFT: our SLIDSOFT calculation software in order to make easier your technical details www.mantion.com 6255 1110 2262 2262A 2265A

Hangers 0265 & 0265L Hangers 2262 & 2262A Hangers 2265 - 2265A & 2265L - 2265AL Hanger 0261 M14x70 137 mm - 5 25/64” 55 mm - 2 11/64” 62 mm - 2 7/16” 50 mm (standard) 1 31/32” 120 mm (L version) 4 23/32” 39 mm - 1 17/32” M14x70 55 mm - 2 11/64” 62 mm - 2 7/16” 136 mm - 5 23/64” 38 mm 1 1/2” 72 mm - 2 53/64” 50 mm (standard) 1 31/32” 120 mm (L version) 4 23/32” Plate 0065 Apron set 0061  M 14  6.5 88 - 315/ 32 inch 150 mm - 5 29/32” 3 mm - 1/8” min. 50mm 1 31/32” max. 65mm 2 9/16” 13.7 mm - 35/64” Plate 0066 35 mm - 1 3/8” 8 mm - 5/16” 280 mm - 11 1/32” 140 mm - 5 33/64” 98 mm - 3 55/64” 18 mm - 45/64” 17, 21 mm - 53/64” 14 mm - 35/64” 24 mm - 15/16” 94 mm - 3 45/64” 40 mm - 1 37/64” 15 mm - 19/32” 10 137 mm - 5 25/64” 70 mm - 2 3/4” 50 mm 1 31/32” 302 mm - 11 57/64” 95 mm - 3 47/64” 95 mm - 3 47/64” 220 mm - 8 21/32” 80 mm -3 5/32” 85 mm - 3 11/32” 45 mm 1 49/64” 100 mm - 3 15/16” 47 mm 1 27/32” 17 mm - 43/64” 55 mm - 2 11/64” 62 mm 2 7/16” 50 mm 1 31/32” 16 mm - 5/8” 3,5 mm - 9/64” 25 mm - 63/64” 13 mm - 33/64” 25 mm - 63/64” M14 100 mm - 3 15/16” 55 mm - 2 11/64” 62 mm - 2 7/16” 31 mm - 1 7/32” 60 mm - 2 23/64” 61 mm - 2 13/32” 60 mm - 2 23/64” 300 KG 400 KG 200 & 2200 series offset bracket - See information on p. 15 corrosion fri cti on durability D 6 C F 2 3 100 000 cycles 13

14 SPORTUB ® TRACKS Item Nr Description Pack. 8570/400 Galvanised track 85 x 70 mm 4 m long 8570/500 Ditto 5 m long 8570/600 Ditto 6 m long HANGERS & PLATES 0281 600 kg Hanger, side fixing, with wheels mounted on needle roller bearings. Removable flange, which enables 2 different positions and an adaptation to 2 different panel thicknesses 2 0281S 1200 kg Ditto with a bigger bore of the wheels and high precision needle roller bearings 2 0285 600 kg Hanger top fixing, with 2 steel wheels mounted on needle roller bearings. Fixing screw Ø M 16. 2 0285L Ditto with long fixing bolt (123 mm). 2 0285S 800 kg Hanger, top fixing with 2 steel wheels mounted on high precicion needle roller bearings. Fixing bolt Ø M 20. 2 0285SL Ditto with long fixing bolt (133 mm). 2 2285 600 kg Hanger, top fixing, 4 wheels with ball bearings, nylon tyre and glass fiber. Fixing bolt Ø M 16. 2 2285L Ditto with long fixing bolt (123 mm). 2 2285A 800 kg Hanger, top fixing with carbonized steel wheels mounted on ball bearings. Fixing bolt Ø M 16. 2 2285AL Ditto with long fixing bolt (123 mm). 2 2285 S 1200 kg Hanger, top fixing with 4 wheels equipped with precision ball bearings. Recommanded for FIRE DOORS and other HIGH QUALITY doors. Fixing bolt Ø M 20. 2 2285SL Ditto with long fixing bolt (133 mm). 2 0085 Plate, welding type Ø M 16. 2 0085S Reinforced plate, welding type Ø M 20. See drawing on p. 17 2 0086 Plate, screwing type for top fixing Ø M 16. 2 0086W «U» Plate, screwing type for top fixing, Ø M 16. 10 0086S Plate, screwing type for top fixing. see drawing p. 17 2 0081 Adjustable apron set for panels from 55 - 75 mm thickness - Side fixing, screwing type. 2 0281 0285 2285 0085 0086 0086 2285A - 2285S 0081 CAPACITY/DOOR: up to 1200 kg TRACK: 8570 MOVEMENT: STRAIGHT capacity per door GUIDES 1115/600 U-profile 50 x 60 mm, galvanised. 6 m long 1059 Bottom guide with olive (equipped with needle roller bearings) fixed on a screwing type plate (with square ends) - For U-profile 50 x 60 mm See dimensions and mounting instructions on p. 60 5 1059 • «HLE» track: the track made of steel with «High Elasticity Limit » enables heavy loads in safe conditions • Ingenious: thanks to its offset bracket, the 281 hanger enables the centred mounting of doors of different thicknesses • The steel hangers with ball bearings (2285S) are suitable for fire doors • For special mounting: «L» version hangers with a long fixing bolt (70 mm longer than the normal version) • For doors over 500 kg: our brackets 8578 MC or 8578 ML have to be fixed every 0.50 m. STRAIGHT sliding doors SLIDSOFT: our SLIDSOFT calculation software in order to make easier your technical details www.mantion.com 8570 1115

Montures A B 285 53 M16 285 S 63 M16 285 L 123 M20 285 SL 133 M20 168 mm - 6 39/64” 70 mm - 2 3/4” 85 mm - 3 11/32” 58 mm 2 9/32” A B Hangers 0285 - 0285L & 0285S - 0285SL Montures A B 2285 2285 A 53 M16 2285 S 63 M20 2285 L 2285 AL 123 M16 2285 SL 133 M20 156 mm - 6 9/64” 70 mm - 2 3/4” 85 mm - 3 11/32” 51 mm - 2 1/64” A B Hangers 2285 - 2285 L 2285 A - 2285 AL 2285 S - 2285 SL Plate 0085 Apron set 0081  M 16  6.5 100 mm - 3 15/16” 150 mm - 5 29/32” 3 mm - 1/8” min. 55 mm 2 11/64” max. 75 mm 2 61/64” 13.7 mm - 35/64” Plate 0086 Plate 0086W Threaded hole M16 400 mm - 1’ 3 3/4” 10 mm - 25/64” 25 mm - 63/64” 135 mm - 5 5/16” 80 mm 3 5/32” 135 mm - 5 5/16” 4x Ø12 26 mm - 1 1/32” 102 mm - 4 1/64” 50 mm - 1 31/32” 17 mm - 43/64” 10 mm - 25/64” Hangers 0281 - 0281S 168 mm - 6 39/64” 70 mm - 2 3/4” 45 mm - 1 49/64” 302 mm - 11 57/64” 95 mm - 3 47/64” 95 mm - 3 47/64” 220 mm - 8 21/32” 80 mm - 3 5/32” 25 85 mm 3 11/32” 45 mm 1 49/64” 100 mm 3 15/16” 47 mm - 1 27/32” 17 mm - 43/64” 13 mm - 33/64” 70 mm - 2 3/4” 85 mm 3 11/32” 50 mm 1 31/32” 16 mm - 5/8” 3,5 mm - 9/64” 25 mm 63/64” 600 KG 800 KG 1200 KG Item Nr A B 0285 53 M 16 0285S 63 M 20 0285L 123 M 16 0285SL 133 M 20 Item Nr A B 2285 2285A 53 M 16 2285S 63 M 20 2285L 2285AL 123 M 16 2285SL 133 M 20 Offset bracket Removable flange, which enables 2 different positions and an adaptation to 2 different panel thicknesses. The door axle is very close to the track axle, this avoids a backbalance 5x 5,8 tapped Bolt M16 welded 210 mm - 8 17/64” 30 mm 1 3/16” 15 mm 19/32” 30 mm 1 3/16” 25 mm 63/64” 35 mm 1 3/8” 15 mm 19/32” Ø19 15 mm 19/32” 2,5 mm - 3/32” 31mm - 1 7/32” 24 mm - 15/16” 105 mm - 4 9/64” 11,5 mm 29/64” 19,5 mm 49/64” corrosion fri cti on durability D 6 C F 2 3 100 000 cycles 200 & 2200 series 15

16 SPORTUB ® TRACKS Item Nr Description Pack. 8570/400 Galvanised track 85 x 70 mm, 4 m long 8570/500 Ditto 5 m long 8570/600 Ditto 6 m long HANGERS & PLATES 0288S 2000 kg Hanger, top fixing, with steel wheels mounted on needle roller bearings. Fixing bolt Ø M 20 2 0288SL Ditto with long fixing bolt (133 mm) 2 2288S Hanger top fixing with 4 wheels equipped with high-precision ball bearings. Recommanded for FIRE DOORS and other HIGH QUALITY doors. Fixing bolt Ø M 20 2 2288SL Ditto with long fixing bolt (133 mm) 2 0085S Reinforced plate, welding type Ø M 20 2 0086S Plate, screwing type for top fixing - Ø M 20 See drawing on p. 17. 2 0085 0086S DOUBLE HANGER "S" VERSION 0288S - 0288SL 2288S - 2288SL GUIDES 1115/600 U-profile 50 x 60 mm, galvanised - 6 m long 1059 Bottom guide with olive (equipped with needle roller beraings) fixed on a screwing type plate (with square ends). For U-profile 50 x 60 mm See dimensions and mounting instructions on p. 60 5 Capacity per door • «HLE» track: the track made of steel with «High Limit of Elasticity» enables heavy loads in safe conditions • Hanger suitable for fire doors (2288S) with steel wheels and precision ball bearings • For special mounting: the fixing bolt is 70 mm longer than the normal version (L version) • For doors over 500 kg: the use of our brackets 8578 MC or 8578 ML is required (1 bracket every 0.50 m) STRAIGHT sliding doors CAPACITY/DOOR: up to 2000 kg TRACK: 8570 MOVEMENT: STRAIGHT SLIDSOFT: our SLIDSOFT calculation software in order to make easier your technical details www.mantion.com 1059 8570 1115

M20 118 mm - 4 41/64” 343 mm - 1’ 1 1/2” 70 mm - 2 3/4” 85 mm - 3 11/32” 63 mm (standard) 2 31/64” 133 mm (L version) 5 15/64” M20 85 mm - 3 11/32” 63 mm (standard) 2 31/64” 133 mm (L version) 5 15/64” 331 mm - 1’ 1 1/32” 113 mm - 4 29/64” 70 mm - 2 3/4” Hangers 288 S & 288SL Hangers 2288S & 2288SL Plate 0085S Plate 0086S 30 mm - 1 3/16” 156 mm - 6 9/64” Ø21 50 mm - 1 31/32” 90° 8 400 mm - 1’ 3 3/4” 45 mm - 1 49/64” 12 mm - 15/32” 4xØ12 M20 25 mm 63/34” 80 mm 3 5/32” 135 mm - 5 5/16” 135 mm - 5 5/16” 2000 KG 200 & 2200 series corrosion fri cti on durability D 6 C F 2 3 100 000 cycles 17

18 The Mantion guaranty applies also on this range (tracks + sets). SPORTUB ® 2.5 mm 3/32” 55 mm - 1 31/32” 62 mm - 2 7/16” 50 mm - 1 31/32” 35 mm - 1 3/8” 85 mm - 3 11/32” 8 mm 5/16” 18 mm 45/64” 18 mm 45/64” 30 mm - 1 3/46” 5 mm 13/64” 5 mm 13/64” 1.5 mm 1/16” 7 mm 9/32” 11.5 mm 29/64” 11.5 mm 29/64” 19 mm 3/4” 11.5 mm 29/64” 14.5 mm 37/64” 14.5 mm 37/64” 2 mm 5/64” 40 mm - 1 37/64” the tracks in 2m, 3m and 4m lengths make transport and mounting easier SPORTUB makes your life easier  all acessories in one set  jointing brackets are included  enables gain of time for the order preparation  in accordance with the European standard EN 1527 Door accessories for straight sliding doors 10 000 CYCLES 3530 5040 6255

19 SET for doors up to 80 kg 3530GV Comprising: - 2 hangers 0235A (top fixing) equipped with 2 steel wheels mounted on needle roller bearings - 2 plates 0036, top fixing. - 6 brackets 3531 - 1 jointing bracket 3531MC - 7 angle plates 3533 - 2 ornemental caps 3540 - 2 bottom guides 1102 - 2 stops 1086 - 1 handle 1298 3530/200 Track 3530. Length: 2 m. 3530/300 Track 3530. Length: 3 m. 1109/200 U-profile 1109. Length: 2 m. SET for doors up to 150 kg 5040GV Comprising: - 2 hangers 0255A (top fixing) equipped with 2 steel wheels mounted on needle roller bearings - 2 plates 0056, top fixing - 8 brackets 5041 - 1 jointing bracket 5041MC - 9 angles 5043 - 2 ornemental caps 5050 - 2 bottom guides 1099 - 2 stops 2091 - 1 handle 1298 5040/300 Track 5040 . Length: 3 m. 1110/300 U-profile 1110. Length: 3 m. SET for doors up to 300 kg 6255GV Comprising: - 2 hangers 0265A (top fixing) equipped with 2 steel wheels mounted on needle roller bearings - 2 plates 0066. Top fixing - 12 brackets 6256 - 1 jointing bracket 6256MC - 13 angle plates 6258 - 2 ornemental caps 6265 - 2 bottom guides 1101 - 2 stops 2094 - 1 handle 1297 6255/300 Track 6255. Length: 3 m. 6255/400 Track 6255 . Length: 4 m. 1110/400 U-profile 1110. Length: 4 m. 3530 0235 A 3533 3531 1298 1102 1109 0036 1086 3531MC 5040 0255 A 5043 5041 1298 1099 1110 0056 2091 5041MC 6255 0265 6258 6256 1297 1101 0066 2094 6256MC 80 Kg 150 Kg 300 Kg 3540 5050 6265 SPORTUB SETS 1110

These hangers are especially designed for lateral sliding doors with a tubular track Hangers with 4 different capacities corresponding to 4 different track sections HOW TO CHOOSE THE HANGER AND THE TRACK: For a door without a service door: the weight of a single panel has to be taken into consideration. For a door with a service door: the weight of a panel has to be multiplied by 1.5 BOTTOM GUIDING: with hinges: as many guides as hangers are required with shoe guides: as many guides as hangers are required (one of them being a half shoe guide) On the push back side, an angle plate fixed on the floor can be used as a guide. 20 SPORTUB ® CAPACITY / PANEL: 200 kg max. TRACK: 3530 to 8570 MOVEMENT: LATERAL The curve has to be fixed on an angle steel by means of a bracket (sealing type) In case of small quoins (inferior to the curve radius) the service door has to be placed at the push back side On the push back side, an angle plate fixed on the floor can be used as a guide LATERAL sliding doors The hangers and the hinges for the 300 series are supplied in a «top fixing» version. On request, they can be supplied in a «side fixing» version.   • • ➊ ➋

Sliding systems for ROUND THE CORNER doors 300® series With screwing type hinges 22-23 With welding type hinges 24-25 21

22 SPORTUB ® HANGERS: CAPACITY: 30 kg Track: 3530 Item Nr Fig. Description Pack. 0332 1 Intermediate hanger with hinge (capacity: 30 kg) 2 0332E 2 Offet end hanger (capacity:15 kg) 2 1104 3 Bottom guide with hinge for U-profile 25 x 17 (1109) 1 1104E 4 Offset bottom guide with hinge for U-profile 25 x 17 (1109) 1 1510C 5 Hinge 80 x 60, axle Ø 10, top fixing 10 1109/400 7 U-profile 25 x 17, galvanized. 4 m long. 4 1109/500 Ditto 5 m long. 4 1109/600 Ditto 6 m long. 4 1109M 8 Jointing bracket for U-profile (25 x 17) Item Nr. 1109 1 3530C 9 Galvanized curve - R: 500 mm For panels up to 550 mm 1 1109C 10 U-curve galvanized, 25 x 17. R: 500 mm 1 3539 11 Angle steel (30 x 20), for curve. Sealing type 610 mm long. 1 HANGERS: CAPACITY: 60 kg Track: 5040 0352 1 Intermediate hanger with hinge (capacity: 60 kg) 2 0352E 2 Offet end hanger (capacity: 30 kg) 2 1105 3 Bottom guide with hinge for U-profile 30 x 30 (1110) 1 1105E 4 Offset bottom guide with hinge for U-profile 30 x 30 (1110) 1 1512C 5 Hinge 85 x 85, axle Ø 12, top fixing 10 1110/400 7 U-profile 30 x 30, galvanised. 4 m long. 4 1110/500 Ditto 5 m long. 4 1110/600 Ditto 6 m long. 4 1110M 8 Jointing bracket for U-profile 30 x 30 (1110) 1 5040C 9 Galvanised curve - R = 600 mm For panels up to 650 mm 1 1111C 10 U-curve galvanised,30 x 30. R = 600 mm 1 5049 11 Angle steel (40 x 25), for curve. Sealing type 710 mm long. 1 HANGERS: CAPACITY 120 kg Track: 6255 0362 1 Intermediate hanger with hinge (capacity: 120 kg) 2 0362E 2 Offset end hanger (capacity: 60 kg) 2 1106 3 Bottom guide with hinge for U-profile 30 x 30 (1110) 1 1106E 4 Offset bottom guide with hinge for U-profile 30 x 30 (1110) 1 1514C 6 Hinge 120 x 100, axle Ø 14, top fixing 6 1110/400 7 U-profile 30 x 30, galvanized. 4 m long. 4 1110/500 Ditto 5 m long. 4 1110/600 Ditto 6 m long. 4 1110 M 8 Jointing bracket for U-profile 30 x 30 (1110) 1 6255C 9 Galvanized curve - R = 800 mm For panels up to 900 mm 1 1112C 10 U-curve galvanised,30 x 30. R = 800 mm 1 6264 11 Angle steel (50 x 30), for curve. Sealing type 870 mm long. 1 HANGERS: CAPACITY: 200 kg Track: 8570 0382 1 Intermediate hanger with hinge (capacity: 200 kg) 2 0382E 2 Offset end hanger (capacity: 100 kg) 2 1108 3 Bottom guide with hinge for U-profile 30 x 30 (1110) 1 1108E 4 Offset bottom guide with hinge for U-profile 30 x 30 (1110) 1 1516C 6 Hinge 120 x 16, axle Ø 14, top fixing 4 1110/400 7 U-profile 30 x 30, galvanized. 4 m long. 4 1110/500 Ditto 5 m long. 4 1110/600 Ditto 6 m long. 4 1110M 8 Jointing bracket for U-profile 30 x 30 (1110) 1 8570C 9 Galvanized curve - R = 1000. For panels up to 1100 mm 1 1113C 10 U-curve galvanized,30 x 30. R = 1000. 1 8579 11 Angle steel (60 x 40), for curve. Sealing type 1030 mm long. 1 GUIDANCE WITH SHOE GUIDE 1011 12 Cast iron shoe guide, sealing type. Adjustable (21 to 50 mm) 10 1012 13 Half shoe guide in cast iron - Sealing type. 4 LATERAL displacement doors 5 1 4 2 6 3 7 8 9 10 12 13 11 SLIDSOFT: our SLIDSOFT calculation software in order to make easier your technical details www.mantion.com

23 Intermediate hangers End hangers Item Nr. A B C D E F G H I J Min. Max. 0332 87 30 30 45 80 60 M 10 5 11 15.2 30 0352 104 44 35 55 85 85 M 12 5 12 25.5 43 0362 140 55 40 70 120 100 M 14 6 15 25.5 50 0382 158 70 55 85 120 100 M 16 6 17 33 50 USE OF CURVE SECTORS FOR WIDE PANELS CURVE SECTOR 3530CS for 3530 track for panels wider than 550 mm 5040CS for 5040 track for panels wider than 650 mm 6255CS for 6255 track for panels wider than 900 mm 8570CS for 8570 track for panels wider than 1100 mm Curve sector Piece of straight track Piece of curve. The curve must be so cut that the whole system makes a 90° angle Jointing bracket FLOOR GUIDING: The use of the curve sectors requires an exclusive use of shoe guide. 300 series screwing type see assembly instructions on p. 20 corrosion fri cti on durability D 6 C F 2 3 100 000 cycles D  A C E  G  A-A A A D C J I

24 SPORTUB ® HANGERS: CAPACITY: 30 Kg Track: 3530 Item Nr Fig. Description Pack. 0332SO 1 Intermediate hanger with hinge (capacity: 30 kg) 2 0332SOE 2 End hanger with a 1/2 hinge (capacity: 15 kg) 2 1104SO 3 Bottom guide with hinge for U-profile 25 x 17 (1109) 2 1104SOE 4 End bottom guide, on 1/2 hinge for U-profile 1109 2 1510SO 5 Welding hinge, Height: 80, axle Ø 10 4 1109/400 6 U-profile 25 x 17, galvanized - 4 m long 4 1109/500 Ditto - 5 m long 4 1109/600 Ditto - 6 m long 4 1109M 7 Jointing bracket for U-profile 25 x 17(1109 ) 1 3530C 8 Galvanized curve 35 x 30 - Radius = 500 For panels up to 500 mm 1 1109C 9 Galvanized U-curve 25 x 17 - Radius = 500 1 3539 11 Angle steel, welding type (30 x 20) for curve. 610 mm long. 1 HANGERS: CAPACITY: 60 Kg Track: 5040 0352SO 1 Intermediate hanger with hinge (capacity: 60 kg) 2 0352SOE 2 End hanger with a 1/2 hinge (capacity: 30 kg) 2 1105SO 3 Bottom guide with hinge for U-profile 30 x 30 (1110) 1 1105SOE 4 End bottom guide, on 1/2 hinge for U-profile 1110 1 1512SO 5 Welding hinge, Height: 85, axle Ø 12 4 1110/400 6 U-profile 30 x 30, galvanised - 4 m long 4 1110/500 Ditto - 5 m long 4 1110/600 Ditto - 6 m long 4 1110M 7 Jointing bracket for U-profile 30 x 30 (1110) 1 5040C 8 Galvanised curve 50 x 40 - Radius = 600 For panels up to 650 mm 1 1111C 9 Galvanised U-curve 30 x 30 - Radius = 600 1 5049 11 Angle steel (30 x 20), for curve. Sealing type 710 mm long. 1 HANGERS: CAPACITY: 120 Kg Track: 6255 0362SO 1 Intermediate hanger with hinge (capacity: 120 kg) 2 0362SOE 2 End hanger with a 1/2 hinge (capacity: 60 kg) 2 1106SO 3 Bottom guide with hinge for U-profile 30 x 30 (1110) 1 1106SOE 4 End bottom guide, on 1/2 hinge for U-profile 1110 1 1514SO 5 Welding hinge, Height: 120, axle Ø 14 4 1110/400 6 U-profile 30 x 30, galvanised - 4 m long 4 1110/500 Ditto - 5 m long 4 1110/600 Ditto - 6 m long 4 1110M 7 Jointing bracket for U-profile 30 x 30 (1110) 1 6255C 8 Galvanised curve 62 x 55 - Radius: 800 For panels up to 900 mm 1 1112C 9 Galvanised U-curve 30 x 30 - Radius: 800 1 6264 11 Angle steel (50 x 30), for curve. Sealing type 870 mm long. 1 HANGERS: CAPACITY: 200 Kg Track: 8570 0382SO 1 Intermediate hanger with hinge (capacity: 200 kg) 2 0382SOE 2 End hanger with a 1/2 hinge (capacity: 100 kg) 2 1108SO 3 Bottom guide with hinge for U-profile 30 x 30 (1110) 1 1108SOE 4 End bottom guide, on 1/2 hinge for U-profile 1110 1 1516SO 5 Welding hinge, Height: 120, axle Ø 16 4 1110/400 6 U-profile 30 x 30, galvanized - 4 m long 4 1110/500 Ditto - 5 m long 4 1110/600 Ditto - 6 m long 4 1110M 7 Jointing bracket for U-profile 30 x 30 (1110) 1 8570C 8 Galvanised curve 85 x 70 - Radius: 1000 For panels up to 1100 mm 1 1113C 9 Galvanised U-curve 30 x 30 - Radius: 1000 1 8579 11 Angle steel (60 x 40), for curve. Sealing type - 1030 mm long. 1 13 GUIDANCE WITH SHOE GUIDE 1011 12 Cast iron shoe guide, sealing type. Adjustable (21 to 50 mm) 10 1012 13 Half shoe guide in cast iron - Sealing type. 4 LATERAL sliding doors 5 1 4 2 3 8 9 11 12 SLIDSOFT: our SLIDSOFT calculation software in order to make easier your technical details www.mantion.com 6 7

25 300 series welding type Item Nr A B C D E F H Min. Max. 0332SO 87 30 30 45 80 22 M 10 11 0352SO 104 44 35 55 85 24 M 12 12 0362SO 140 55 40 70 120 30 M 14 15 0382SO 158 70 55 85 120 34 M 16 17 Intermediate hangers End hangers USE OF CURVES SECTORS FOR WIDE PANELS CURVE SECTORS 3530CS for 3530 track for panels wider than 550 mm 5040CS for 5040 track for panels wider than 650 mm 6255CS for 6255 track for panels wider than 900 mm 8570CS for 8570 track for panels wider than 1100 mm Curve sector Piece of straight track Piece of curve The curve has to be cut so that the whole makes a 90° angle Jointing brackets FLOOR GUIDING: The use of curve sectors requires an exclusive use of shoe guide. See assembly instructions on p. 20 corrosion fri cti on durability D 6 C F 2 3 100 000 cycles  A C   A A D A-A E D C

26 SPORTUB ® CAPACITY / PANEL: up to 150 kg TRACK: 3530 to 8570 MOVEMENT: STRAIGHT FOLDING Place a complementary bracket on the push back side and use brackets 8578MC or brackets 8578ML for doors over 500 kg For a good sliding, the width of the panels must not exceed 90 cm Floor guiding is imperative FLOOR GUIDING: The axis of the hangers, hinges and guides making up an articulation must be perfectly aligned The hangers and hinges of this 500 Series are supplied for a top-fixing. They can be supplied for a side-fixing on request. FOLDING doors • A complete range: - 4 systems up to 150 kg / panel - for panels up to 0.90 m width - screwing or welding versions • Solution which combines a wide opening with a service door • Reduced space needed when open

Sliding systems for FOLDING doors with equal panels 500® Series With screwing type hinges 28-29 With welding type hinges 30-31 27

SLIDSOFT: our SLIDSOFT calculation software in order to make easier your technical details www.mantion.com 28 SPORTUB ® FOR PANELS UP TO 20 KG Track: 3530 Item Nr Fig. Description Pack. 0532 1 Intermediate hanger, mounted on a hinge (capacity 40 kg) 2 0532E 2 Off-center end hanger (capacity 20 kg) 2 1104 3 Bottom guide on a hinge for U profile 25 x 17 (1109) 1 1104E 4 Off-center bottom end guide for U profile 25 x 17 (1109) 1 1510C 5 Hinge 80 x 60, with a Ø 10 axle, top-fixing 10 1109/400 7 Galvanised U-profile 25 x 17 - 4 m long 4 1109/500 Ditto - 5 m long 4 1109/600 Ditto - 6 m long 4 1109M 8 Jointing bracket for U profile 25 x 17 (1109) 1 FOR PANELS UP TO 38 KG Track: 5040 0552 1 Intermediate hanger, mounted on a hinge (capacity 75 kg) 2 0552E 2 Off-center end hanger (capacity 37 kg) 2 1105 3 Bottom guide on a hinge for U profile 30 x 30 (1110) 1 1105E 4 Off-center bottom end guide for U profile 30 x 30 (1110) 1 1512C 5 Hinge 85 x 85, with a Ø 12 axle, top-fixing 10 1110/400 7 Galvanised U-profile 30 x 30 - 4 m long 4 1110/500 Ditto - 5 m long 4 1110/600 Ditto - 6 m long 4 1110M 8 Jointing bracket for U profile 30 x 30 (1110) 1 FOR PANELS UP TO 75 KG Track: 6255 0562 1 Intermediate hanger, mounted on a hinge (capacity 150 kg) 2 0562E 2 Off-center end hanger (capacity 75 kg) 2 1106 3 Bottom guide on a hinge for U-profile 30 x 30 (1110) 1 1106E 4 Off-center bottom end guide for U-profile 30 x 30 (1110) 1 1514C 6 Hinge 120 x 100, with a Ø 14 axle, top-fixing 6 1110/400 7 Galvanised U profile 30 x 30 - 4 m long 4 1110/500 Ditto - 5 m long 4 1110/600 Ditto - 6 m long 4 1110M 8 Jointing bracket for U-profile 30 x 30 (1110) 1 FOR PANELS UP TO 150 KG Track: 8570 0582 1 Intermediate hanger, mounted on a hinge (capacity 300 kg) 2 0582E 2 Off-center end hanger (capacity 150 kg) 2 1114 3 Bottom guide on a hinge for U-profile 50 x 60 (1115) 1 1114E 4 Off-center bottom end guide for U-profile 50 x 60 (1115) 1 1516C 6 Hinge 120 x 100, with a Ø 16 axle, top-fixing 4 1115/600 7 Galvanised U profile 50 x 60 - 6 m long 1 1115M 8 Jointing bracket for U profile 50 x 60 (1115) 1 EXAMPLES OF ASSEMBLY: 2 panels and 1 service door 6 panels together 2 panels and 1 service door + 2 panels together 2 panels and 1 service door + 1 panel 4 panels together 4 panels and 1 service door FOLDING doors 1 2 5 6 7 8 4 3

29 Intermediate hangers End hangers Item Nr A B C D E F G I J Min. Max. 0532 77 6 15 80 60 5 11 M10 15 30 0552 116 5 15 85 85 5 12 M12 25.5 42.5 0562 137 5 17 120 100 6 13 M14 25.5 50 0582 168 5 17 120 100 6 13 M16 33 50 G Item Nr G 0532E 17 0552E 28 0562E 28.5 0582E 37 USE OF END HANGERS: CROSS SECTION, TOP VIEW: folding door with 4 panels and a swinging panel, folding on one side only They must be fixed on to the end panels. The width of the end panels must be equal to the width of the other panels, increased by the G dimension. This top view of a set of panels shows more precisely the use of the items in our 500 series. The swinging panel can be blocked: - by a bar (opening from the inside only) - by a lock axis of the door when closed swinging panel bar hinge axis of the track 500 Series screwing type corrosion fri cti on durability D 6 C F 2 3 100 000 cycles See our assembly recommendations on p. 26 C D E B G A F A A C B A-A J I

30 SPORTUB ® FOR PANELS UP TO 20 KG Track: 3530 Item Nr Fig. Description Pack. 0532SO 1 Intermediate hanger, mounted on a hinge (capacity 40 kg) 2 0532SOE 2 End hanger mounted on a 1/2 hinge (capacity 20 kg) 2 1104SO 3 Bottom guide mounted on a hinge for U profile 25 x 17 (1109) 2 1104SOE 4 End bottom guide mounted on a 1/2 hinge for U profile 25 x 17 (1109) 2 1510SO 5 Hinge, welding type Height: 80 mm - Ø 10 mm axle 4 1109/400 6 Galvanized U profile 25 x 17 - 4 m long 4 1109/500 Ditto - 5 m long 4 1109/600 Ditto - 6 m long 4 1109M 7 Jointing bracket for U profile 25 x 17 (item No. 1109) 1 FOR PANELS UP TO 38 KG Track: 5040 Item Nr Fig. Description Pack. 0552SO 1 Intermediate hanger, mounted on a hinge (capacity 75 kg) 2 0552SOE 2 End hanger mounted on a 1/2 hinge (capacity 37 kg) 2 1105SO 3 Bottom guide mounted on a hinge for U-profile 30 x 30 (1110) 1 1105SOE 4 End bottom guide mounted on a 1/2 hinge for U profile 30 x 30 (1110) 1 1512SO 5 Hinge, welding type Height: 85 mm - Ø 12 mm axle 4 1110/400 6 Galvanised U profile 30 x 30 - 4 m long 4 1110/500 Ditto - 5 m long 4 1110/600 Ditto - 6 m long 4 1110M 7 Jointing bracket for U-profile 30 x 30 (1110) 1 FOR PANELS UP TO 75 KG Track: 6255 Item Nr Fig. Description Pack. 0562SO 1 Intermediate hanger, mounted on a hinge (capacity 150 kg) 2 0562SOE 2 End hanger mounted on a 1/2 hinge (capacity 75 kg) 2 1106SO 3 Bottom guide mounted on a hinge for U profile 30 x 30 (1110) 1 1106SOE 4 End bottom guide mounted on a 1/2 hinge for U profile 30 x 30 (1110) 1 1514SO 5 Hinge, welding type Height: 120 mm - Ø 14 mm axle 4 1110/400 6 Galvanised U-profile 30 x 30 - 4 m long 4 1110/500 Ditto - 5 m long 4 1110/600 Ditto - 6 m long 4 1110M 7 Jointing bracket for U-profile 30 x 30 (1110) 1 FOR PANELS UP TO 150 KG Track: 8570 Item Nr Fig. Description Pack. 0582SO 1 Intermediate hanger, mounted on a hinge (capacity 300 kg) 2 0582SOE 2 End hanger mounted on a 1/2 hinge (capacity 150 kg) 2 1114SO 3 Bottom guide mounted on a hinge for U profile 50 x 60 (1115) 1 1114SOE 4 End bottom guide mounted on a 1/2 hinge for U profile 50 x 60 (item No. 1115) 1 1516SO 5 Hinge, welding type Height: 120 mm - Ø 16 mm axle 4 1115/600 6 Galvanised U profile 50 x 60 - 6 m long 1 1115M 7 Jointing bracket for U-profile 50 x 60 (1115) 1 1 2 EXAMPLES OF ASSEMBLY: See on previous page FOLDING doors SLIDSOFT: our SLIDSOFT calculation software in order to make easier your technical details www.mantion.com 5 4 3 6 7

31 Intermediate hangers End hangers Item Nr A B C D F G Min Max 0532SO 77 6 15 80 22 11 M10 0552SO 116 5 15 85 26 12 M12 0562SO 137 5 17 120 30 13 M14 0582SO 168 5 17 120 34 13 M16 G Item Nr G 0532SOE 17 0552SOE 28 0562SOE 28.5 0582SOE 37 DOOR WITHOUT SERVICE DOOR: CROSS SECTION, TOP VIEW: folding door with 4 panels and a swinging panel, folding on one side only The end hanger must be fixed on the last panel. The width of the end panels must be equal to the width of the other panels, increased by the G dimension. This top view of a set of panels shows more precisely the use of the items in our 500 Series. The swinging panel can be blocked: - by a bar (opening from the inside only) - by a lock axis of the door when closed swinging panel bar hinge axis of the track 500 Series welding type See our assembly recommendations on p. 26 corrosion fri cti on durability D 6 C F 2 3 100 000 cycles A A A-A D B A F G C C B

32 SPORTUB ® CAPACITY / PANEL: up to 300 kg TRACK: from 2525 to 8570 MOVEMENT: FOLDING For doors without swinging panel: Fix the first hanger in the middle of the first panel starting with the side opposite to the frame, and then a hanger every second panel. For doors with swinging panel: Fix the first hanger in the middle of the first panel preceeding the folding panel, and then a hanger every second panel. For doors over 500 kg place an additional bracket on the push back side and use brackets 8578MC or brackets 8578ML For a good sliding,the width of the panels must not exceed 90 cm Floor guiding is absolutely requested EXAMPLES OF HANGER POSITIONING: CONCERTINA FOLDING doors • Complete range: - 5 systems: up to 150 kg / panel - max panel width: 0.90 m - screwing or welding versions • Solution adapted to very wide openings • Reduced space needed when open • Ideal solution to separate large rooms (restaurants, lecture-rooms, halls...)

Sliding systems for CONCERTINA FOLDING doors with one half panel 600® Series 33

34 SPORTUB ® HANGERS: CAPACITY 30 Kg Track: 2525 Item Nr Fig. Description Pack. 0623 1 Swivelling hanger with adjustable height, nylon wheels, Ø M8 screw 2 0026 3 Top-fixing screwing plate Ø M8 10 0021 5 Side-fixing screwing plate Ø M8 10 1504C3 8 Top-fixing screwing hinge 80 x 45, Ø 4 mm axle 25 1088 12 Bottom guide without plate for U profile 25 x 17 (item No. 1109) 10 1102 14 Bottom guide on screwing plate for U profile 25 x 17 (item No.1109) 20 1109/400 17 Galvanised U-profile 25 x 17 - 4 m long 4 1109/500 Ditto - 5 m long 4 1109/600 Ditto - 6 m long 4 1109M 18 Jointing bracket for U-profile 25 x 17 (item No. 1109) 1 HANGERS: CAPACITY 40 Kg Track: 3530 Item Nr Fig. Description Pack. 0633A 2 Swivelling hanger with adjustable height, steel wheels, Ø M10 screw 2 0633D Swivelling hanger with adjustable height, Delrin wheels, Ø M10 screw 2 0036 3 Top-fixing screwing plate Ø M10 20 0037 6 Side-fixing screwing plate for thin panels, Ø M10 10 0031 7 Adjustable apron set for 25 to 35 mm panels (see dimensions on p. 9) 16 1510C 9 Screwing hinge 80 x 60, Ø 10, top-fixing 10 1510SO 11 Welding hinge - Height: 80 mm - Axle: Ø 10 mm 4 1088 12 Bottom guide without plate for U-profile 25 x 17 (1109) 10 1102 14 Bottom guide on screwing plate for U-profile 25 x 17 (1109) 20 1109/400 17 Galvanised U profile 25 x 17 - 4 m long 4 1109/500 Ditto - 5 m long 4 1109/600 Ditto - 6 m long 4 1109M 18 Jointing bracket for U profile 25 x 17 (1109) 1 HANGERS: CAPACITY 75 Kg Track: 5040 Item Nr Fig. Description Pack. 0653A 2 Swivelling hanger with adjustable height, steel wheels, Ø M12 screw 2 0653D Swivelling hanger with adjustable height, Delrin wheels, Ø M12 screw 2 0056 3 Top-fixing screwing plate Ø M12 10 0051 7 Adjustable apron set for 40 to 50 mm panels (see dimensions on p. 11) 10 1510C 9 Screwing hinge 80 x 60, Ø 10, top-fixing 10 1512C Screwing hinge 85 x 85, Ø 12, top-fixing, for wood of 35 10 1512SO 11 Welding hinge - Height: 85 mm - Axle: Ø 12 mm 4 1089 13 Bottom guide without plate for U-profile 30 x 30 (1110) 10 1099 15 Bottom guide on screwing plate for U-profile 30 x 30 (1110) 10 1110/400 17 Galvanised U profile 30 x 30 - 4 m long 4 1110/500 Ditto - 5 m long 4 1110/600 Ditto - 6 m long 4 1110M 18 Jointing bracket for U-profile 30 x 30 (1110) 1 HANGERS: CAPACITY 150 Kg Track: 6255 Item Nr Fig. Description Pack. 0663 2 Swivelling hanger with adjustable height, steel wheels, Ø M14 screw 2 0066 4 Top-fixing screwing plate Ø M14 10 0061 7 Adjustable apron set for 50 to 65 mm panels (see dimensions on p. 13) 2 1512C 9 Screwing hinge 85 x 85, Ø 12, top-fixing for wood of 35 10 1514C 10 Screwing hinge 120 x 100, Ø 14, top-fixing for wood of 40 6 1514SO 11 Welding hinge - Height: 120 mm - Axle: Ø 14 mm 4 1089 13 Bottom guide without plate for U-profile 30 x 30 (1110) 10 1101 15 Reinforced bottom guide on screwing plate for U-profile 30 x 30 (1110) 10 1110/400 17 Galvanised U-profile 30 x 30 - 4 m long 4 1110/500 Ditto - 5 m long 4 1110/600 Ditto - 6 m long 4 1110M 18 Jointing bracket for U-profile 30 x 30 (1110) 1 HANGERS: CAPACITY 300 Kg Track: 8570 Item Nr Fig. Description Pack. 0683 2 Swivelling hanger with adjustable height, steel wheels, Ø M16 screw 2 0086 4 Top-fixing screwing plate Ø M16 2 0081 7 Adjustable apron set for 55 to 75 mm panels (see dimensions on p. 15) 2 1516C 10 Screwing hinge 120 x 100, axle Ø 16, top-fixing 4 1516SO 11 Welding hinge - Height: 120 mm - Axle: Ø 16 mm 4 1059 16 Bottom guide on screwing plate for U-profile 50 x 60 (1115) 5 1115/600 17 Galvanised U-profile 50 x 60 - 6 m long 1 1115M 18 Jointing bracket for U-profile 50 x 60 (1115) 1 1 2 3 4 5 6 7 8 9 10 11 1 12 13 141 1 15 16 CONCERTINA FOLDING doors 17 18

RkJQdWJsaXNoZXIy ODAxNzY=