SAFGLASS PINCE 120

Capacity/Door: 120 kg
Door thickness: 12 - 15 mm
Track: Aluminium
Movement: Straight

Straight sliding Systems for glass doors of 12 or 15 mm thickness, combining refined design with smooth rolling.

Thanks to the clamp, there is no need to drill the glass in any way.
Confortable: the damper closer system M66 for gentle closing of doors (automatically follows door to its closed position over 100 mm); and hydraulic closer stop allows doors to open softly.
Practical: the clamp can be mounted with or without pelmet (no drilling on the visible side).
Clever: Rollers equipped with a ball joint that improves the robustness of the system and adjusts to any mounting location defects.

Track – 2 m

Ref: 11312/200
- Anodized aluminium track, 37.4 x 28 mm cross-section drilled every 0.30 m, length = 2 m
View product
Track – 3 m

Ref: 11312/300
- Anodized aluminium track, 37.4 x 28 mm cross-section drilled every 0.30 m, length = 3 m
View product
Track – 5 m

Ref: 11312/500
- Anodized aluminium track, 37.4 x 28 mm cross-section drilled every 0.30 m, length = 5 m
View product
Track – 6 m

Ref: 11312/600
- Anodized aluminium track, 37.4 x 28 mm cross-section drilled every 0.30 m, length = 6 m
View product

Gear SAFGLASS PINCE 120

Ref: GA4204
- Gear for one 12 mm door including: - 2 rollers with precision bearings + installation template (STAINLESS screws, bolts and bearings) - 2 anodised aluminium clamps - 2 claw stops - 1 stainless steel lower guide - Installation instructions
View product
Gear SAFGLASS PINCE 120

Ref: GA4205
- Gear for one 15 mm door including: - 2 rollers with precision bearings + installation template (STAINLESS screws, bolts and bearings) - 2 anodised aluminium clamps - 2 claw stops - 1 grey nylon lower guide - Installation instructions
View product

Pelmet – 2 m

Ref: 11031/200
- Anodized aluminium pelmet (available in RAL colours upon request) to be snapped onto track 11312. To be used for ceiling mounting. Height = 67 mm - Length = 2 m
View product
Pelmet – 3 m

Ref: 11031/300
- Anodized aluminium pelmet (available in RAL colours upon request) to be snapped onto track 11312. To be used for ceiling mounting. Height = 67 mm - Length = 2 m
View product
Pelmet – 2 m

Ref: 11041/200
- Snap-on anodised aluminium pelmet*. To be used for wall mounting. Height = 86 mm – Length = 2 m.* Coverings are made of anodised aluminium. They are available on request painted in your choice of RAL colour
View product
Pelmet – 3 m

Ref: 11041/300
- Snap-on anodised aluminium pelmet*. To be used for wall mounting. Height = 86 mm – Length = 3 m.* Coverings are made of anodised aluminium. They are available on request painted in your choice of RAL colour
View product
Pelmet – 4 m

Ref: 11041/400
- Snap-on anodised aluminium pelmet*. To be used for wall mounting. Height = 86 mm – Length = 4 m.* Coverings are made of anodised aluminium. They are available on request painted in your choice of RAL colour
View product
Pelmet – 6 m

Ref: 11041/600
- Snap-on anodised aluminium pelmet*. To be used for wall mounting. Height = 86 mm – Length = 6 m.* Coverings are made of anodised aluminium. They are available on request painted in your choice of RAL colour
View product
Raw aluminum pelmet – 2 m

Ref: 11041B/200

Raw aluminium pelmet to be snapped onto tracks 11108 and 11312. To be used for wall mounting. Height = 86 mm - Length = 2 m.

View product
Raw aluminum pelmet – 4 m

Ref: 11041B/400

Raw aluminium pelmet to be snapped onto tracks 11108 and 11312. To be used for wall mounting. Height = 86 mm - Length = 4 m.

View product
End caps

Ref: 11045B

Set of end caps in raw aluminium for pelmet 11041.

View product

Clamp covering – 12 mm

Ref: GA4120
- CLAMP COVERING*(only covers clamp) Aluminium covering for 12 mm clamp consisting of 4 clamp pelmets and 4 end pieces - Length of clamp pelmets = 194 mm - * Coverings are made of anodised aluminium. They are available in raw aluminium (to be painted) or painted on request in your choice of RAL colour.
View product
Clamp covering – 15 mm

Ref: GA4420
- CLAMP COVERING* (only covers clamp) Aluminium covering for 15 mm clamp consisting of 4 clamp pelmets and 4 end pieces - Length of clamp pelmets = 194 mm * Coverings are made of anodised aluminium. They are available on request painted in your choice of RAL colour
View product

Clamp covering – 12 mm

Ref: GA4121
- LONG CLAMP COVERING*(covers entire width of door) Aluminium covering for 12 mm clamp consisting of 2 clamp pelmets and 2 end pieces. Length of clamp pelmets = 1.5 m (cut to length)
View product
Clamp covering – 12 mm

Ref: GA4123
- LONG CLAMP COVERING*(covers entire width of door) Aluminium covering for 12 mm clamp consisting of 2 clamp pelmets and 2 end pieces - Length of clamp pelmets = 3 m (cut to length) * Coverings are made of anodised aluminium. They are available in raw aluminium (to be painted) or painted on request in your choice of RAL colour
View product
Long clamp covering – 15 mm

Ref: GA4421
- LONG CLAMP COVERING* (covers entire width of door) Aluminium covering for 15 mm clamp consisting of 2 clamp pelmets and 2 end pieces. Length of clamp pelmets = 1.5 m (cut to length) * Coverings are made of anodised aluminium. They are available on request painted in your choice of RAL colour
View product
Long clamp covering – 15 mm

Ref: GA4423
- LONG CLAMP COVERING* (covers entire width of door) / Aluminium covering for 15 mm clamp consisting of 2 clamp pelmets and 2 end pieces / Length of clamp pelmets = 3 m (cut to length)
View product

Angle plate

Ref: 11013
- Angled (sliding) bracket for wall mounting of tracks 11108 and 11312. Fastened every 0.44 m (Track 11108) and fastened every 0.30 m (Track 11312).
View product

SAFGLASS PINCE 120

Choose your Tracks

Track – 2 m

Track – 3 m

Track – 5 m

Track – 6 m

Choose your Kit

Gear SAFGLASS PINCE 120

Gear SAFGLASS PINCE 120

Choose your Pelmets and end caps

Pelmet – 2 m

Pelmet – 3 m

Pelmet – 2 m

Pelmet – 3 m

Pelmet – 4 m

Pelmet – 6 m

Raw aluminum pelmet – 2 m

Raw aluminum pelmet – 4 m

End caps

Choose your Clamp covering

Clamp covering – 12 mm

Clamp covering – 15 mm

Choose your Long clamp covering

Clamp covering – 12 mm

Clamp covering – 12 mm

Long clamp covering – 15 mm

Long clamp covering – 15 mm

Choose your Accessories

Angle plate