TANGO

TANGO

Capacity/Pannel: 40 kg
Track: Aluminium (SAF)
Movement: Folding/Sliding

Sliding-Folding system for partition doors and wardrobe doors.

  • FLEXIBLE: for 2 or 4 pannels
  • DESIGN: no bottom track and minimum gaps
  • PRACTICAL: easy to install and to operate
EPD* Number of cycles* Fabrication25 years guarantee
TANGO - Image 1 TANGO - Image 2 TANGO - Image 3 TANGO - Image 4

Choose your Complete sets

5 product(s)
  • Set - Track 1.20 m

    Set – Track 1.20 m

    Ref: TANGO40-120

    Set for 2 panels including : 1 aluminium track of 1.20 m (SAF), 1 SAF hanger (ball bearings) with plate, 1 upper pivot, 1 lower pivot, 3 hinges 1504C3, screws and mounting instructions.

  • Set - Track 1.50 m

    Set – Track 1.50 m

    Ref: TANGO40-150

    Set for 2 panels including:

    • 1 aluminium track of 1.50 m (SAF);
    • 1 SAF hanger (ball bearings) with plate;
    • 1 upper pivot;
    • 1 lower pivot;
    • 3 hinges 1504C3;
    • Screws and mounting instructions.
  • Set - Track 2 m

    Set – Track 2 m

    Ref: TANGO40-200

    Set for 4 panels including :
    - 1 aluminium track of 2 m (SAF)
    - 2 SAF hangers (ball bearings) with plate
    - 2 upper pivots
    - 2 lower pivots
    - 6 hinges 1504C3
    - Screws and mounting instructions.

  • Set - Track 3 m

    Set – Track 3 m

    Ref: TANGO40-300

    Set for 4 panels including :
    - 1 aluminium track of 3 m (SAF)
    - 2 SAF hangers (ball bearings) with plate
    - 2 upper pivots
    - 2 lower pivots
    - 6 hinges 1504C3
    - Screws and mounting instructions.

  • Set - 1.95 m track

    Set – 1.95 m track

    Ref: TANGO40-195

    Set for 4 panels, includes:

    • 1 x 1.95 m anodised aluminium track (SAF);
    • 2 SAF hangers (smooth pin with ball bearings) with plate;
    • 2 upper pivots;
    • 2 lower pivots;
    • 6 hinges 1504C3;
    • screws, spanner and installation instructions.

Choose your Tracks

3 product(s)

Choose your Kit

1 product(s)
  • Gear

    Gear

    Ref: TANGO42

    Gear to guide 2 panels. Suitable for TANGO40-120 and TANGO40-150 to add 2 panels on a 4 panels installation (2+2).

Choose your Hinges

2 product(s)
  • Hinge

    Hinge

    Ref: 1504PI
    • Special hinge with ball bearings. The benefits: - Holds the panels in the closed position - Closes the gap between the panels. This special hinge is an alternative to the hinges 1504C3 (3 hinges are required for 2 panels installations and 6 for 4 panels installations). 
  • “Invisible” flush-mounted hinge
    New

    “Invisible” flush-mounted hinge

    Ref: 1540

    “Invisible” flush-mounted hinge. The hinge is concealed inside the panel and is flush with the surface.

    Advantages:

    • 3D adjustment: depth (X): ± 2 mm / vertical (Z): ± 2.5 mm / horizontal (Y): ±1 mm
    • Reversible hinge
    • Width 23 mm

Choose your Accessories

1 product(s)
  • Angle plate

    Angle plate

    Ref: 11013
    • Angled (sliding) bracket for wall mounting of tracks 11108 and 11312. Fastened every 0.44 m (Track 11108) and fastened every 0.30 m (Track 11312).
Are you sure you want to remove this item from your basket?